Srx5600 Services Gateway I/O Cards; Srx5600 Services Gateway I/O Card Description; Srx5600 Services Gateway I/O Card Components - Juniper SRX5600 Hardware Manual

Related
Documentation

SRX5600 Services Gateway I/O Cards

SRX5600 Services Gateway I/O Card Description

Copyright © 2010, Juniper Networks, Inc.
Power distribution—The power supplies are connected to the midplane, which
distributes power to all the services gateway components.
Signal path—The midplane provides the signal path to the IOCs, SCBs, SPCs, Routing
Engine, and other system components for monitoring and control of the system.
Figure 4: Midplane
SRX5600 Services Gateway Chassis on page 7
SRX5600 Services Gateway Card Cage and Slots on page 10
SRX5600 Services Gateway I/O Card Description on page 11
SRX5600 Services Gateway Flex IOC and Port Module Description on page 14
SRX5600 Services Gateway Services Processing Card Description on page 19
SRX5600 Services Gateway Switch Control Board Description on page 22
This section includes the following topics:
SRX5600 Services Gateway I/O Card Description on page 11
SRX5600 Services Gateway I/O Card Components on page 12
SRX5600 Services Gateway I/O Card LEDs on page 13
The I/O Cards (IOCs) are optimized for Ethernet density and are capable of supporting
up to 40 Gigabit Ethernet or four 10-Gigabit Ethernet ports (see Figure 5 on page 12).
The IOC assembly combines packet forwarding and Ethernet interfaces on a single board,
with four 10-Gbps Packet Forwarding Engines. Each Packet Forwarding Engine consists
Chapter 2: SRX5600 Services Gateway Hardware Components
11