CHAPTER 5
Chapter 5 Unpacking the SRX5600
Services Gateway
Tools and Parts Required to Unpack the SRX5600 Services Gateway
Related
Documentation
Unpacking the SRX5600 Services Gateway
Copyright © 2010, Juniper Networks, Inc.
This section includes the following topics:
Tools and Parts Required to Unpack the SRX5600 Services Gateway on page 53
Unpacking the SRX5600 Services Gateway on page 53
Verifying the SRX5600 Services Gateway Parts Received on page 55
To unpack the services gateway and prepare for installation, you need the following
tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
Blank panels to cover any slots not occupied by a component
Overview of Installing the SRX5600 Services Gateway on page 43
Site Preparation Checklist for the SRX5600 Services Gateway on page 45
Unpacking the SRX5600 Services Gateway on page 53
Verifying the SRX5600 Services Gateway Parts Received on page 55
The services gateway is shipped in a wooden crate. A wooden pallet forms the base of
the crate. The device chassis is bolted to this pallet. A Getting Started Guide and a
cardboard accessory box are also included in the shipping crate.
The shipping container measures 33.5 in. (85.1 cm) high, 28 in. (71.1 cm) wide, and
26 in. (66.0 cm) deep. The total weight of the container containing the device and
accessories can range from 153 lb (70 kg) to 351 lb (159.2 kg).
53