Connecting The Srx550 Services Gateway To External Devices; Organizing Interface Cables On The Srx550 Services Gateway - Juniper SRX550 Hardware Manual

CHAPTER 17
Connecting the SRX550 Services Gateway to External
Devices
IN THIS CHAPTER

Organizing Interface Cables on the SRX550 Services Gateway | 79

Connecting the Modem to the Console Port on the SRX550 Services Gateway | 80
Connecting to the SRX550 Services Gateway from the CLI with the USB Console Port | 81
Connecting the CLI at the User End for the SRX550 Services Gateway | 83
Configuring the Modem at the SRX550 Services Gateway End | 85
Organizing Interface Cables on the SRX550 Services Gateway
Arrange network cables as follows to prevent them from dislodging or developing stress points:
Secure cables so that they are not supporting their own weight as they hang to the floor.
Place excess cable out of the way in neatly coiled loops.
Use fasteners to maintain the shape of cable loops.
RELATED DOCUMENTATION
Preventing Electrostatic Discharge Damage to the SRX550 Services Gateway
Connecting the SRX550 Services Gateway to the AC Power Source | 87
Connecting the SRX550 Services Gateway to a DC Power Source | 90
Grounding the SRX550 Services Gateway | 77
79