Srx5600 Services Gateway Card Cage And Slots; Srx5600 Services Gateway Midplane Description - Juniper SRX5600 Hardware Manual

SRX5600 Services Gateway Hardware Guide

SRX5600 Services Gateway Card Cage and Slots

Table 4: SRX5600 Services Gateway Card Cage Slots
Card Cage Slot
5
4
3
2
1
0
1
0
Related
Documentation

SRX5600 Services Gateway Midplane Description

10
SRX5600 Services Gateway Card Cage and Slots on page 10
SRX5600 Services Gateway Cooling System Description on page 37
General Electrical Safety Guidelines and Warnings on page 189
The card cage is the set of eight horizontal slots in the front of the chassis where you
install cards. The slots are numbered from bottom to top. Table 4 on page 10 describes
the types of cards that you can install into each slot.
Eligible Cards
SPC IOC
X X
X X
X X
X X
X X
X X
SRX5600 Services Gateway Midplane Description on page 10
SRX5600 Services Gateway Chassis on page 7
The midplane is located toward the rear of the chassis and forms the rear of the card
cage (see Figure 4 on page 11). IOCs, Flex IOCs, SPCs, and SCBs install into the midplane
from the front of the chassis, and the power supplies install into the midplane from the
rear of the chassis. The cooling system components also connect to the midplane.
The midplane performs the following major functions:
Data path—Data packets are transferred across the midplane between the IOCs and
SPCs through the fabric ASICs on the SCBs.
Flex IOC SCB
X
X
X
X
X
X
X
X
Copyright © 2010, Juniper Networks, Inc.