Srx5600 Services Gateway I/O Card Leds - Juniper SRX5600 Hardware Manual

Related
Documentation

SRX5600 Services Gateway I/O Card LEDs

Copyright © 2010, Juniper Networks, Inc.
Two interfaces from the SCBs that enable the boards to be powered on and controlled
Physical IOC connectors
Packet Forwarding Engines
Midplane connectors and power circuitry
Processor subsystem, which includes a 1.2-GHz CPU, system controller, and 1 GB of
SDRAM
SRX5600 Services Gateway I/O Card Description on page 11
Installing an SRX5600 Services Gateway IOC on page 135
Removing an SRX5600 Services Gateway IOC on page 133
SRX5600 Services Gateway Field-Replaceable Units on page 115
SRX5600 Services Gateway I/O Card LEDs on page 13
LEDs on the 4-port 10-Gigabit Ethernet faceplate indicate the port status. LEDs are
labeled top to bottom
0/0
Table 5: 4-Port 10-Gigabit Ethernet IOC LEDs
Label Color
OK/FAIL Green
Red
Green
TUNNEL
LINK Green
LEDs on the 40–port Gigabit Ethernet faceplate indicate the port status. LEDs are labeled
horizontally and top to bottom
through (see Table 6 on page 13).
3/0 3/5
Table 6: 40-Port Gigabit Ethernet IOC LEDs
Label Color
OK/FAIL Green
Red
Chapter 2: SRX5600 Services Gateway Hardware Components
through (see Table 5 on page 13).
0/3
State Description
On steadily IOC is functioning normally.
On steadily IOC has failed.
Off Normal operating mode.
On steadily Port configured in tunnel mode.
On steadily Link is active.
Off No link.
0/0 through 0/5 , 1/0 through
State Description
On steadily IOC is functioning normally.
On steadily IOC has failed.
1/5 , 2/0 through 2/5 , and
13