Configuring Clock - Avaya 4000 Series Quick Start Configuration

Table 16: clock summer-time zone command
date
day
month
year
hh:mm
day
month
year
hh:mm
offset
zone

Configuring clock

In addition to SNTP time configuration, a clock provides the switch with time information. This
clock provides the switch information in the instance that SNTP time is not available.
About this task
Use the clock source command to set the time source for the switch.
Procedure
1. Enable Global Configuration mode in ACLI:
2. Set the clock source for the switch.
Related topics:
Variable definitions
Quick Start Configuration for Avaya ERS 4000 Series
Variable
Indicates that daylight savings time you set to start and end
on the specified days every year.
Day to start daylight savings time.
Month to start daylight savings time.
Year to start daylight savings time.
Hour and minute to start daylight savings time.
Day to end daylight savings time.
Month to end daylight savings time.
Year to end daylight savings time.
Hour and minute to end daylight savings time.
Number of minutes to add during the summer time.
The time zone acronym to be displayed when daylight
savings time is in effect. If it is unspecified, it defaults to the
time zone acronym set when the time zone was set.
enable
configure terminal
clock source {ntp | sntp | sysUpTime }
on page 40
Value
November 2013
Configuring clock
39