Enabling The Web Management Interface; Accessing The Switch Through The Web Interface - Avaya 4000 Series Quick Start Configuration

2. Enter the logon and password when prompted.

Enabling the web management interface

About this task
The web server needs to be enabled to access EDM. If you do not wish EDM to be accessible
on the device, disable the web server. By default web server is enabled.
Procedure
1. Enter the Global Configuration command mode in ACLI:
2. At the command prompt, enter the following command:

Accessing the switch through the Web interface

You can use the EDM to configure and maintain your switch through a Web-based graphical
user interface
By default, you can access the Web interface using Hypertext Transfer Protocol Secure
(HTTPS) only.
For more information about configuring the Web server to respond to HTTPS only, or both
HTTPS and Hypertext Transfer Protocol (HTTP) client browser requests, see Configuring
Security on Avaya Ethernet Routing Switch 4000 Series, NN47205-505.
Before you begin
• Ensure that the switch is running.
• Note the switch IP address.
• Ensure that the Web server is enabled.
• Note the user name and password.
• Open one of the supported Web browsers.
Quick Start Configuration for Avaya ERS 4000 Series
enable
configure terminal
web-server enable
Enabling the web management interface
November 2013 43