Configuring The Web And Telnet Password Using Edm - Avaya 4000 Series Quick Start Configuration

Configuring the switch using ACLI
9. Type the same password for read-write access in the Re-enter to verify box.
10. On the toolbar, click Apply.
Variable definitions
Use the data in the following table to configure the console switch password.
Console Stack Password Type
Read-Only Stack Password
Read-Write Stack Password

Configuring the Web and Telnet password using EDM

Use the following procedure to configure a password for Web and Telnet access to a stack, or
standalone switch.
Related topics:
Procedure steps
Variable definitions
Procedure steps
1. From the navigation tree, double-click Security.
2. In the Security tree, click Web/Telnet/Console.
30 Quick Start Configuration for Avaya ERS 4000 Series
Variable
on page 30
on page 31
Comments? infodev@avaya.com
Value
Specifies the type of password to use.
Values include:
• none—disables the password
• Local Password— uses the locally defined
password for serial console access.
• RADIUS Authentication— uses RADIUS
authentication for serial console access.
• TACACS Authentication— uses TACACS
+ authentication, authorization, and
accounting (AAA) services authentication
for console access.
Specifies the read-only password for stack or
switch access.
Specifies the read-write password for stack
or switch access.
November 2013