Avaya 4000 Series Quick Start Configuration page 31

3. In the work area, click the Web/Telnet tab.
4. Click the arrow on the Web/Telnet Switch Password Type box.
5. Select a password type from the list.
6. Type the password for read-only access in the Read-Only Stack Password box.
7. Type the same password for read-only access in the Re-enter to verify box.
8. Type the password for read-write access in the Read-Write Switch Password
9. Type the same password for read-write access in the Re-enter to verify box.
10. On the toolbar, click Apply.
Variable definitions
Web/Telnet Stack Password Type
Read-Only Stack Password
Read-Write Switch Password
Quick Start Configuration for Avaya ERS 4000 Series
box.
Variable
Setting user access limitations using EDM
Value
Specifies the type of the password to use.
Values include:
• none—disables the password
• Local Password— uses the locally defined
password for Web and Telnet access.
• RADIUS Authentication— uses RADIUS
password authentication for Web and
Telnet access.
• TACACS Authentication— uses TACACS
+ authentication, authorization, and
accounting (AAA) services authentication
for Web and Telnet access.
Specifies the read-only password for stack or
switch access. The maximum length of the
password is 15 characters.
Specifies the read-write password for stack
or switch access. The maximum length of the
password is 15 characters.
November 2013 31