Variable Definitions - Avaya 4000 Series Quick Start Configuration

Configuring the switch using ACLI
600 VLAN #600
Port Members: NONE
700 VLAN #700
Port Members: NONE
Total VLANs: 13

Variable Definitions

<VID_list>
name <line>
type
remote-span
protocol-decEther2
protocol-ipEther2
protocol-ipv6Ether2
protocol-ipx802.2
protocol-ipx802.3
protocol-ipxEther2
protocol-ipxSnap
protocol-Netbios
protocol-RarpEther2
protocol-sna802.2
protocol-snaEther2
46 Quick Start Configuration for Avaya ERS 4000 Series
B-VLAN
Port
Variable
Comments? infodev@avaya.com
None
None
Value
Enter as an individual VLAN ID to create a single
VLAN or enter as a range of VLAN IDs to create
multiple VLANs simultaneously. A VLAN ID can range
from 1 to 4094.
Note:
VLAN ID values 4001 through 4008 are reserved
and cannot be used.
Specifies a unique alphanumeric name for an
individual VLAN.
Note:
Do not enter a value for this parameter when you
are creating multiple VLANs simultaneously.
Enter the type of VLAN to create:
• port - port-based
• protocol - protocol-based (see following list)
Specify as RSPAN VLAN.
Specify a decEther2 protocol-based VLAN.
Specify an ipEther2 protocol-based VLAN.
Specify an ipv6Ether2 protocol-based VLAN.
Specify an ipx802.2 protocol-based VLAN.
Specify an ipx802.3 protocol-based VLAN.
Specify an ipxEther2 protocol-based VLAN.
Specify an ipxSnap protocol-based VLAN.
Specify a NetBIOS protocol-based VLAN.
Specify a RarpEther2 protocol-based VLAN.
Specify an sna802.2 protocol-based VLAN.
Specify an snaEther2 protocol-based VLAN.
0x0000 Yes IVL
0x0000 Yes IVL
November 2013
No
No