To Display Application Selection Screen - Konica Minolta bizhub pro c500 User Manual

To Display Application Selection Screen

Follow the procedure below to display the Application Selection Screen and select
the desired copying features.
1.
Touch APPLICATION on the Basic Screen.
The Application Selection Screen will be displayed on the touch panel.
• When a function key is touched, it becomes highlighted. If you touch a
function key, another screen or two will display to enable you to enter the
appropriate settings.
• Check BOOK MARK in the message area of the subsequent screen, if
desired, so that the screen may be directly accessed from the Check
Screen to change the setting you made.
• If one function on the menu is incompatible with another, it will appear
dimmed.
• The APPLICATION key on the Basic Screen will be highlighted when
application selections have been made.
To restore the original copying conditions, touch CANCEL.
To clear all Application settings, touch ALL CLEAR.
2.
Touch OK on the Application Selection Screen.
Selections will be completed and the Basic Screen will be restored.
With the Basic Screen displayed, you can press [START] to perform the
operation.
10-2