Copying Image In The Centre Of Copy Paper (Auto Layout) - Konica Minolta bizhub pro c500 User Manual

Copying Image in the Centre of Copy Paper (AUTO Layout)

Use this function to detect the image area of the original and centre the whole image
on the copy paper making it easy to copy small pieces of paper.
Specifications for AUTO Layout
❒ Non-Image Area Erase is automatically selected. Release it manually when
using RADF to scan originals.
❒ Incompatible Conditions: 2a2, 2a1, APS, AMS, Rotation, Rotation Sort,
Rotation Group, Mixed Original, Z-Folded Original, Tab Paper, Sheet/Cover
Insertion, Chapter*, Combination*, Booklet*, Image Insert, Multi-Page
Enlargement, Reverse Image*, Repeat, Image Shift, Overlay, Storing Image in
Overlay Memory
* Chapter, Combination, Booklet and Reverse Image are available when Non-Image Area
Erase is released manually.
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch AUTO Layout on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
• Non-Image Area Erase will be selected automatically. When using RADF to
scan the original, touch to deselect this function.
• If Dual Page is used with this function, the original smaller than the
selected paper size will be printed in the centre of the copy paper without
image division performed.
Set original
Auto Layout copying
10-43