Konica Minolta bizhub pro c500 User Manual page 371

4.
Make setting changes from the Key Operator Mode Screen, as
described on the following pages.
• To display menus [11] to [20] of the Key Operator Mode Screen, touch the
lower arrow key to scroll.
To return the previous menu, touch the upper arrow key.
• The menus [21] to [25] will be displayed and available by service setting.
Contact your service representative, if desired.
5.
Touch PREVIOUS SCREEN to exit the Key Operator Mode.
The Basic Screen will be restored.
[24] can be registered and recalled as a profile. Contact your service
representative, if desired. See p. 8-25 for details.
Printer Lead Edge Timing Adjustment (Side 1 / Side 2), Printer
Registration Loop Adjustment (Side 1 / Side 2), Printer Centring
Adjustment (Side 1 / Side 2), Printer Vertical Magnification Adjustment
(Side 1 / Side 2*), Printer Horizontal Magnification Adjustment (Side 1 /
Side 2)
*: Available only when Memory Switch No. 42 is turned ON.
An Outline of the Key Operator Mode (continued)
14-3