Konica Minolta bizhub pro c500 User Manual page 354

Inserting a New Staple Cartridge into FS-513/FS-606 Finisher (continued)
3.
Pull up the cartridge housing, then remove it while sliding it along
the stapler rail.
4.
Remove the empty cartridge from the cartridge housing.
5.
Insert the new cartridge into the housing.
Firmly insert the cartridge into the housing while aligning the arrow sides of
both case and housing, then remove the lock tape from the cartridge.
Do not remove the staples remaining inside the housing; otherwise, the first
sheet output after the replenishment will not be stapled.
13-8
1
2