Copying Non-Standard Size Originals (Original Form) - Konica Minolta bizhub pro c500 User Manual

Copying Non-Standard Size Originals (Original Form)

The copier usually detects the standard size of originals fed through RADF or
positioned on the platen glass (STD size mode).
Use Non STD size mode to specify the scanning area manually for copying or
printing special size originals. Use Tab paper mode to copy a tabbed original,
including the image of the tab part, onto tabbed copy paper.
Specifications for Original Form
❒ Tab extension width: 12.5 mm or less
❒ Incompatible with Non STD Size: Mixed Original, Z-Folded Original, Tab Paper,
Storing image in Overlay Memory
❒ Incompatible with FULL AREA: APS, AMS, Rotation Sort, Rotation Group,
Mixed Original, Z-Folded Original, Tab Paper, Combination, Booklet, Dual
Page, Non-Image Area Erase, Image Shift
❒ Incompatible with Tab Paper: 2a2, 2a1, APS, AMS, ACS, Single Colour, Full
Colour, Original Type in Special Original, Mixed Original, Z-Folded Original,
Non STD Size, Sheet/Cover Insertion, Chapter, Combination, Booklet, Image
Insert, Dual Page, Multi-Page Enlargement, Storing image in Overlay Memory
1.
Touch SPECIAL ORIGINAL on the Basic Screen.
The Special Original popup menu will be displayed.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch SPECIAL SETTING.
3.
Touch Non STD size or Tab paper.
The popup menu will appear for Non STD size or Tab paper size setting.
9-6