Table of Contents
Advertisement
The E.K.C. Data Setting window will be displayed.
Enter the following items to register a new E.K.C. data, then click on
[Registration].
Number:
Automatically assigned
Password: 8 digits max.
Name:
8 characters max.
Limit:
999,999 copies max.
To clear the text boxes, click on [Reset].
To cancel adding a new E.K.C. data, click on any E.K.C. Function Setting
menu item to jump to the desired window.
DETAILS: Error Message
• A duplicate password or name will be rejected with an error message.
However, duplicating a password is possible using the Key Operator
setting. Refer to p. 14-15.
• The Name entry box accepts letters (capital letters only), numbers, and
four symbols: (, ), -, and /. Any other symbols will be rejected with an error
message displayed in the window.
• Max. 1,000 E.K.C. entries can be registered. An error message will be
displayed if the above limit is exceeded.
• An error message may be displayed when the data entry has not been
completed due to the machine operation in progress. Please click on
[Registration] while the machine is in an idle state.
Setting E.K.C. Function (continued)
11-11
Advertisement
Table of Contents
Troubleshooting
