Table of Contents
Advertisement
(3) Check the original set direction with the Original direction icon at the
upper left corner of the Basic Screen.
To change the original set direction, touch SPECIAL ORIGINAL on the
Basic Screen to display the Special Original popup menu, touch the
desired original set direction key, then touch OK to return to the Basic
Screen.
Proceed to step 6.
5.
Touch OUTPUT MENU to display the Output Mode popup menu,
then touch SUB TRAY to highlight it.
To select Face down non-sort mode, deselect both FACE UP and GROUP.
To select Face up non-sort mode, touch FACE UP to highlight it.
To select Face down group mode, touch GROUP to highlight it.
To select Face up group mode, touch FACE UP and GROUP to highlight
them.
Touch OK to restore the Basic Screen. OUTPUT MENU will be highlighted,
and the output icon of the selected output mode will be displayed in the
OUTPUT area.
See p. 3-50 to p. 3-51 for details of the output icons displayed on the Basic
Screen.
6.
Select additional copy conditions, as desired.
7.
Enter the desired print quantity from the control panel keypad.
See p. 12-4 to p. 12-5 to be sure that the finisher capacity is not exceeded.
Output Mode for Machine with Finisher (continued)
3-49
Advertisement
Table of Contents
Troubleshooting
