[5] Lock/Delete Job Memory
Use this function to lock/unlock or delete a Job that has been programmed using Job
Memory function.
Key Operator Mode Screen
Procedure
1 Touch [5] Lock/delete job memory to display the Lock/Delete Job Memory
Screen.
2 To lock/unlock a Job memory:
(1) Touch the key on the left side of the desired Job number. Use arrow keys to
scroll to the desired Job number, if required.
(2) The lock icon will appear on the touched key to show that the selected job is
locked. The previously locked Job will be unlocked when selected, and the
lock icon on the touched key will disappear.
NOTE:
The settings of a locked Job cannot be changed.
To delete a Job memory:
(1) Touch the Job number key you want to delete. The selected key will be
highlighted.
(2) Touch Delete. Selected programs and the name will be deleted from the Job
memory.
NOTE:
A locked job can also be deleted, with the lock on it released at the same time.
Once deleted, the programs cannot be restored.
3 Touch OK to complete the setting and return to the Key Operator Mode Screen,
or touch CANCEL to restore the previous setting.
14-20
Lock/Delete Job Memory Screen