Konica Minolta bizhub pro c500 User Manual page 76

5.
Press [START].
The original for the job will be scanned, and the highlighted FREE JOB
folder key will change to SCAN JOB.
When scanning is completed, SCAN JOB will change to RESERVE JOB,
and the next FREE JOB becomes active.
6.
If setting more than one reserve job, touch the next FREE JOB to
highlight it.
7.
Set the desired copying conditions, enter the print quantity,
position original(s), then press [START].
Up to 9 reserve jobs can be prepared.
Copying on the reserve job will start automatically after completing the
warm-up.
• The Job Status Screen allows you to alter the output order of the reserve
jobs or to delete the reserve job. See p. 3-38 ~ p. 3-40.
If all three reserve job keys are used, touch the active FREE JOB
•
key at the far right to scroll.
To stop printing, press [STOP]. See p. 3-13 for details.
3-12
Setting Job During Warm-up (continued)
See p. 3-35 ~ p. 3-37.