Output Mode For Machine With Finisher - Konica Minolta bizhub pro c500 User Manual

Output Mode for Machine with Finisher

Finisher FS-513/FS-606 is equipped with a primary (main) and a secondary (sub)
exit trays. Without using any optional equipment, each exit tray provides the output
modes as described below.
When the Memory switch No. 58 "Finisher operating (Thick)" of the Key
Operator mode is set to prefer image quality, copy speed may become
maximum one-sixth lower depending upon the paper type or specified output
mode. For more detailed information, contact your service representative.
Primay (Main) Tray:
1 Non-sort mode simply means that the offset-stacker finisher modes are not
selected. Copies will be stacked upon exit without being offset by sorted sets.
2 Sort mode outputs multiple copies of the original set, having each sorted set
offset by 30mm upon exit.
3 Staple mode offsets and staples each sorted set. Up to 50 sheets (or within 5mm
thick) can be stapled.
4 Group mode groups together multiple copies of each original and offsets the sets
by 30mm upon exit.
Using Face up mode in combination with the above four modes, simplex copies exit
face up on the exit tray.
Non-sort
4
3
2
1
4
3
2
1
4
3
2
1
Sort
4
3
2
1
4
3
2
4
1
3
2
1
Offset by 30mm
4
3
2
1
Example:
Make 3 copied sets
from 4 original sheets
4
Staple-sort
3
2
1
4
3
2
1
4
3
2
2 staples
4
1
3
2
4
1
3
2
1
4
3
2
1
1 oblique
staple
Offset by 30mm
Group
4
4
4
3
3
3
2
2
2
1
1
1
3-45