Page 9
Setting Scan Transmission Function ..........8-22 Transmitting Machine Setting File ..........8-28 Displaying Job History ..............8-36 8.6.1 Turning On/Off Job History ............8-36 8.6.2 Displaying Job History List ............8-38 Appendix How to Input Characters ..............9-3 10 Index bizhub PRO C6501 Contents-7...
Page 13
Introduction This section describes the overview of this document. ACKNOWLEDGEMENTS - KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of im- aging are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS, INC. - bizhub PRO is registered trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, Inc.
* bizhub PRO C6501 User’s Guide - POD Administrator’s Reference (This book) This guide provides you with detailed information about the machine man- agement and how to customize the machine according to your daily use.
Copy Screen. Please refer to User’s Guide - Copier, page 9-44 for more information. After completing the Paper Setting mode settings, touch [Close] to exit the Paper Setting mode. Any other settings are unavailable during the Paper Setting mode. bizhub PRO C6501...
Page 16
Right/Left shift amount for both front and back pages. For the details, see User’s Guide - Copier, page 9-44. After completing the Adjustment mode settings, touch [Close] to exit the Adjustment mode. Any other settings are unavailable during the Both Sides Adjustment mode. bizhub PRO C6501...
Page 17
[Controller] key: The Controller Setting Menu Screen is displayed. Specify the settings concerning the optional Print Controller. For the details, see User’s Guide enclosed with Image controller. Touch the [MACHINE] tab to exit the Controller Setting mode. bizhub PRO C6501...
[Close] and [Exit] on the Utility Screen Touch [Close] to return to the previous screen. Touch [Exit] to return to the screen displayed before pressing [Utility/Counter] on the control panel. bizhub PRO C6501...
, 136-162g/m , 163- 209g/m , 210-256g/m , 257-300g/m The unit display for paper weight can be changed. Touch [Unit Change] to switch between the options. See page 2-5 for details of relation between paper type and weight. bizhub PRO C6501...
Page 22
Use the Air Assist function to blow air to the paper from the guide plate inside the tray in order to prevent feeding troubles which a specific paper type tends to cause. Select one of the following four conditions. Auto, On (Strong), On (Weak), Off bizhub PRO C6501...
- Color Specific Color specific paper is the type of paper used for color copying to prevent color dulling on high quality paper. Select [Color Specific] for those trays that are used for color specific paper. bizhub PRO C6501...
Page 24
Paper Setting Weight is classified into eight types as shown in the following table. bizhub PRO C6501...
Follow the procedure below to register paper type/weight in the User Setting. Procedure Press [Utility/Counter] on the control panel. The Utility Menu Screen will be dis- played. Touch [02 User Setting], [01 System Setting], and then [03 Feed Tray Setting]. bizhub PRO C6501...
Page 27
Touch the key to be registered. – To modify the a paper setting which is already registered, touch to select the corresponding name for the setting. To register a new setting, touch to highlight a blank line. bizhub PRO C6501...
Page 28
See page 2-5 for details of the paper types. Enter the paper name. – Touch [Name] to display the Input Name Screen. – Enter the name of the paper to be used, and then touch [OK]. You can use maximum 22 characters. 2-10 bizhub PRO C6501...
Page 29
Touch [Weight] to display the Paper Weight Screen. – Select a desired key to set the paper weight. To change the unit for paper weight, touch [Unit Change] until a desired unit is displayed. Touch [OK] on selecting an appropriate key. bizhub PRO C6501 2-11...
Page 30
Touch [Front] or [Back] on the Front and Back Page Adjustment Screen to select the printed side. Select the adjustment item (vertical zoom, horizontal zoom, vertical shift, horizontal shift, and Registration) Operate the process adjustment. – Touch [Process Adj.] 2-12 bizhub PRO C6501...
Page 31
Specify whether to punch holes on paper or not. – Select [Punched] or [No punched]. Specify whether to use color specific paper or not. – Select [Non White] or [White]. Specify the air assist setting. – Select [Auto], [On (Strong)], [On (Weak)], or [Off]. bizhub PRO C6501 2-13...
Page 32
Please refer to page 9-44 on the User's Guide - Copier for more in- formation. Touch [OK] on the Input Condition Screen. – The Paper Setting Screen will be restored. Touch [Reset] to reset to the initial setting. 2-14 bizhub PRO C6501...
Page 33
Machine Status Screen only. Paper Setting of User Setting does not provide this function. Contact your service representative for details. Air assist setting will be effective only when tray 4 or tray 5 is selected. bizhub PRO C6501 2-15...
Follow the procedure below to delete the paper setting previously registered. Procedure Press [Utility/Counter] on the control panel. The Utility Menu Screen will be dis- played. Touch [02User Setting], [01System Setting], and then [03Feed Tray Setting]. 2-16 bizhub PRO C6501...
Page 35
Paper Setting Touch [01Paper Setting]. The Paper Setting Screen will be displayed. Touch the key to be deleted. bizhub PRO C6501 2-17...
Page 36
Touch [Yes] to delete, or [No]. – Return to the Input Condition Screen. To delete multiple paper types, repeat steps 4 to 6. Touch [Close] on the Paper Setting Screen. – Touch [Exit] to return to the Copy Screen. 2-18 bizhub PRO C6501...
To specify Restart Timing Adjustment Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [01 Machine Adjustment], [01 Printer Adjustment], and then [01 Restart Timing Adjustment]. The Restart Timing Adjustment Screen will be displayed. bizhub PRO C6501...
Page 40
Select A3 w/11" × 17" w paper, then press [START]. The sample pattern will be output. Measure the resultant restart timing. If the desired result cannot be obtained, touch the [ADJUSTMENT] tab. The Restart Timing Adjustment Screen will be restored. bizhub PRO C6501...
Page 41
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -60 to +60, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is ob- tained. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [01 Machine Adjustment], [01 Printer Adjustment], and then [02 Centering Adjustment]. The Centering Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501...
Page 43
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -40 to +40, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is ob- tained. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501...
To specify FD-Mag. Adjustment Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [01 Machine Adjustment], [01 Printer Adjustment], and then [03 FD-Mag. Adjustment]. The FD-Mag. Adjustment Screen will be displayed. bizhub PRO C6501...
Page 45
Select A3 w/11" × 17" w paper, then press [START]. The sample pattern will be output. Measure the resultant magnification to the direction of paper feed. 205.7 If the desired result cannot be obtained, touch the [ADJUSTMENT] tab. The FD-Mag. Adjustment Screen will be restored. bizhub PRO C6501...
Page 46
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -100 to +100, 1 step = 0.01% Repeat the adjustment steps from 3 to 9 until the desired result is ob- tained. Touch [Return] to restore the Adjustment Menu Screen. 3-10 bizhub PRO C6501...
The Adjustment Menu Screen will be displayed. Touch [01 Machine Adjustment], [01 Printer Adjustment], and then [04 CD-Mag. Adjustment]. The CD-Mag. Adjustment Screen will be displayed. Touch the required item key. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-11...
Page 48
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -100 to +100, 1 step = 0.01% Repeat the adjustment steps from 3 to 9 until the desired result is ob- tained. Touch [Return] to restore the Adjustment Menu Screen. 3-12 bizhub PRO C6501...
The Adjustment Menu Screen will be displayed. Touch [01 Machine Adjustment], [02 Scanner Adjustment], and then [01 Restart Timing Adjustment]. The Scanner Restart Timing Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-13...
Page 50
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -10 to +20, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 7 until the desired result is ob- tained. Touch [Return] to restore the Adjustment Menu Screen. 3-14 bizhub PRO C6501...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [01 Machine Adjustment], [02 Scanner Adjustment], and then [02 Centering Adjustment]. The Centering Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-15...
Page 52
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -30 to +30, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is ob- tained. Touch [Return] to restore the Adjustment Menu Screen. 3-16 bizhub PRO C6501...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [01 Machine Adjustment], [02 Scanner Adjustment], and then [03 FD-Mag. Adjustment]. The FD-Mag. Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-17...
Page 54
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -40 to +40, 1 step = 0.05% Repeat the adjustment steps from 3 to 7 until the desired result is ob- tained. Touch [Return] to restore the Adjustment Menu Screen. 3-18 bizhub PRO C6501...
The Adjustment Menu Screen will be displayed. Touch [02 Image Quality Stability]. The Image Quality Stability Screen will be displayed. Select [Speed] or [Stability] for a copying or printing job. Touch [OK] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-19...
The Adjustment Menu Screen will be displayed. Touch [03 Execute Adjust Operation]. The Execute Adjust Operation Screen will be displayed. Touch an appropriate key to execute the adjustment operation. Touch [OK] to restore the Adjustment Menu Screen. 3-20 bizhub PRO C6501...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [01 Stapler Position Adj.], and then [01 Staple Center Position]. The Staple Center Position Screen will be displayed. bizhub PRO C6501 3-21...
Page 58
If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Staple Center Position Screen will be restored. Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -20 (forward) to +20 (backward), 1 step = 0.1 mm 3-22 bizhub PRO C6501...
Page 59
(a) of the stapling center position. If the test desired result cannot be obtained, touch [ADJUSTMENT] tab. Repeat the adjustment steps from 3 to 7 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-23...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [01 Stapler Position Adj.], and then [02 Paper Width (Staple)]. The Paper Width (Staple) Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. 3-24 bizhub PRO C6501...
Page 61
If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Paper Width (Staple) Screen will be restored. bizhub PRO C6501 3-25...
Page 62
Remove the output paper, and close the Finisher door. If the test desired result cannot be obtained, touch [ADJUSTMENT] tab. Repeat the adjustment steps from 3 to 10 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. 3-26 bizhub PRO C6501...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [01 Stapler Position Adj.], and then [03 Paper Width (Straight)]. The Paper Width (Straight) Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-27...
Page 64
If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Paper Width (Straight) Screen will be restored. 3-28 bizhub PRO C6501...
Page 65
Remove the output paper, and close the Finisher door. If the test desired result cannot be obtained, touch [ADJUSTMENT] tab. Repeat the adjustment steps from 3 to 10 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-29...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [01 Stapler Position Adj.], and then [04 Exit Guide Center Adj.]. The Exit Guide Center Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. 3-30 bizhub PRO C6501...
Page 67
[<<SET]. Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm Repeat the adjustment steps from 3 to 6 until the desired result is ob- tained. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-31...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [01 Stapler Position Adj.], and then [05 Exit Guide Paper Width]. The Exit Guide Paper Width Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. 3-32 bizhub PRO C6501...
Page 69
[<<SET]. Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm Repeat the adjustment steps from 3 to 7 until the desired result is ob- tained. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-33...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [02 Multi Folder (Punch) Adj.], and then [01 Paper Width Adjustment]. The Paper Width Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. 3-34 bizhub PRO C6501...
Page 71
Touch [Return] to restore the Adjustment Menu Screen. Note If the setting is too wide, the center position of punch holes may dislo- cate. If the setting is too narrow, the position of punch holes may vary. bizhub PRO C6501 3-35...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [02 Multi Folder (Punch) Adj.], and then [02 Hole-Punch Vertical Pos.]. Touch [2-Hole Punch] or [4-Hole Punch]. The corresponding Paper Width Adjustment Screen is displayed. 3-36 bizhub PRO C6501...
Page 73
Check the distance (a) from the edge of the feeding sheet to the center position of the punch hole. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Paper Width Adjustment Screen will be restored. bizhub PRO C6501 3-37...
Page 74
Repeat the adjustment steps from 4 to 9 until the desired result is ob- tained. If adjustment in any other size is required, repeat steps from 4 to 10. Touch [Return] to restore the Adjustment Menu Screen. 3-38 bizhub PRO C6501...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then [01 Half Fold Position Adj.]. The Half Fold Position Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-39...
Page 76
Repeat the adjustment steps from 3 to 8 until the desired result is ob- tained. If adjustment in any other size is required, repeat steps from 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. 3-40 bizhub PRO C6501...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then [02 Tri-Fold-in Pos. Adj.]. The Tri-Fold-in Position Adjustment Screen will be displayed. bizhub PRO C6501 3-41...
Page 78
Fold-in, then press [Start] on the control panel. A sample pattern will be output. Check a distance (a) and distance (b) on the output sheet. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Tri-Fold-in Position Adjustment Screen will be restored. 3-42 bizhub PRO C6501...
Page 79
"-" value is entered. Repeat steps 3 to 10 until the desired result is obtained. If adjustment in any other size is required, repeat steps from 3 to 11. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-43...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then [03 Tri-Fold-out Pos. Adj.]. The Tri-Fold-out Position Adjustment Screen will be displayed. 3-44 bizhub PRO C6501...
Page 81
Fold-out, then press [Start] on the control panel. A sample pattern will be output. Check a distance (a) and distance (b) on the output sheet. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Tri-Fold-out Position Adjustment Screen will be restored. bizhub PRO C6501 3-45...
Page 82
"-" value is entered. Repeat steps 3 to 10 until the desired result is obtained. If adjustment in any other size is required, repeat steps from 3 to 11. Touch [Return] to restore the Adjustment Menu Screen. 3-46 bizhub PRO C6501...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then [04 Double Parallel Pos. Adj.]. The Double Parallel Position Adjustment Screen will be displayed. bizhub PRO C6501 3-47...
Page 84
A sample pattern will be output. Check a distance (a) and distance (b) on the output sheet. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Double Parallel Position Adjustment Screen will be restored. 3-48 bizhub PRO C6501...
Page 85
"-" value is entered. Repeat steps 3 to 10 until the desired result is obtained. If adjustment in any other size is required, repeat steps from 3 to 11. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-49...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then [05 Z-Fold Position Adj.]. The Z-Fold Position Adjustment Screen will be displayed. 3-50 bizhub PRO C6501...
Page 87
[Start] on the control panel. A sample pattern will be output. Check a distance (a) and distance (b) on the output sheet. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Z-Fold Position Adjustment Screen will be restored. bizhub PRO C6501 3-51...
Page 88
"-" value is entered. Repeat steps 3 to 10 until the desired result is obtained. If adjustment in any other size is required, repeat steps from 3 to 11. Touch [Return] to restore the Adjustment Menu Screen. 3-52 bizhub PRO C6501...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then [06 Gate Fold Position Adj]. The Gate Fold Position Adjustment Screen will be displayed. bizhub PRO C6501 3-53...
Page 90
A sample pattern will be output. Check a distance (a), distance (b) and distance (c) on the output sheet. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Gate Fold Position Adjustment Screen will be restored. 3-54 bizhub PRO C6501...
Page 91
"-" value is entered. Repeat steps 3 to 10 until the desired result is obtained. If adjustment in any other size is required, repeat steps from 3 to 11. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-55...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [05 Stacker Adjustment], and then [01 Paper Width Adjustment]. The Paper Width Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. 3-56 bizhub PRO C6501...
Page 93
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -20 (narrow) to +20 (wide), 1 step = 0.1 mm Repeat steps 3 to 6 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-57...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [05 Stacker Adjustment], and then [02 Paper Length Adjustment]. The Paper Length Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. 3-58 bizhub PRO C6501...
Page 95
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -20 (narrow) to +20 (wide), 1 step = 0.1 mm Repeat steps 3 to 6 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-59...
Touch Adjustment on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [06 Saddle Stitcher Adj.], and then [01 Staple Center Adj.]. The Staple Center Adjustment Screen will be displayed. 3-60 bizhub PRO C6501...
Page 97
Select the Fold & Staple mode, then press [Start] on the control panel. A sample copy will be output. Check misalignment (a) of the folded line and stapling position. If the test desired result cannot be obtained, touch [ADJUSTMENT] tab. The Staple Center Adjustment Screen will be restored. bizhub PRO C6501 3-61...
Page 98
[<<SET]. Available range: -50 (forward) to +50 (backward), 1 step = 0.1 mm Repeat the adjustment steps from 3 to 7 until the desired result is ob- tained. Touch [Return] to restore the Adjustment Menu Screen. 3-62 bizhub PRO C6501...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [06 Saddle Stitcher Adj.], and then [02 Staple Paper Width Adj.]. The Staple Paper Width Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-63...
Page 100
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is ob- tained. 3-64 bizhub PRO C6501...
Page 101
* Using paper size of which actual width is less than 222 mm such as A4 , the staple pitch will be set to 91 mm automatically even if the value shorter than 91 mm of staple pitch is entered. bizhub PRO C6501 3-65...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [06 Saddle Stitcher Adj.], and then [03 Staple Pitch Adjustment]. The Staple Pitch Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. 3-66 bizhub PRO C6501...
Page 103
Repeat the adjustment steps from 3 to 8 until the desired result is ob- tained. If adjustment in any other paper size is required, repeat steps from 3 to Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-67...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [06 Saddle Stitcher Adj.], and then [04 Half Fold Position Adj.]. The Half Fold Position Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. 3-68 bizhub PRO C6501...
Page 105
Repeat the adjustment steps from 3 to 8 until the desired result is ob- tained. If adjustment in any other size is required, repeat steps 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-69...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [06 Saddle Stitcher Adj.], and then [05 Tri-Fold Position Adj.]. The Tri-Fold Position Adjustment Screen will be displayed. 3-70 bizhub PRO C6501...
Page 107
Fold, then press [Start] on the control panel. A sample pattern will be output. Check a distance (a) and distance (b) on the output sheet. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Tri-Fold Position Adjustment Screen will be restored. bizhub PRO C6501 3-71...
Page 108
"-" value is entered. Repeat steps 3 to 10 until the desired result is obtained. If adjustment in any other size is required, repeat steps 3 to 11. Touch [Return] to restore the Adjustment Menu Screen. 3-72 bizhub PRO C6501...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [06 Saddle Stitcher Adj.], and then [06 Fold Paper Width Adj.]. The Fold Paper Width Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-73...
Page 110
Repeat the adjustment steps from 3 to 8 until the desired result is ob- tained. If adjustment in any other size is required, repeat steps 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. 3-74 bizhub PRO C6501...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [06 Saddle Stitcher Adj.], and then [07 Trimming Adjustment]. The Trimming Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-75...
Page 112
If "All Size" is selected as paper size, the entered adjustment value will be applied to all sizes. If specific paper size is selected, adjustment value will be the sum of the entered value and the value previously specified for "All Size". 3-76 bizhub PRO C6501...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [06 Saddle Stitcher Adj.], and then [08 Trimming Receiver Adj.]. The Trimming Receiver Adjustment Screen will be displayed. bizhub PRO C6501 3-77...
Page 114
Touch [Execute Compulsive Movement] to force the receiver to be moved. This operation takes effect immediately, and touching [Cancel] will not abort the operation. Touch [OK] to complete the setting. The Adjustment Menu Screen will be restored. 3-78 bizhub PRO C6501...
To specify Curl Reform Direction Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [07 RU Adjustment], and then [01Curl Reform Direction]. The Curl Reform Direction Screen will be displayed. bizhub PRO C6501 3-79...
Page 116
Adjustment Touch to select [Upper] or [Lower]. Touch [Off] if you do not use the function. Touch [Return] to restore the Adjustment Menu Screen. 3-80 bizhub PRO C6501...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [08 Perfect Binder Adjustment], and then [01 Cover Trimming Adjustment]. The Cover Trimming Adjustment Screen will be displayed. bizhub PRO C6501 3-81...
Page 118
Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -128 (short) to +127 (long), 1 step = 0.1 mm 3-82 bizhub PRO C6501...
Page 119
Adjustment Repeat the adjustment steps from 3 to 8 until the desired result is obtained. Touch [Return] to restore the Perfect Binder Adjustment Menu Screen. bizhub PRO C6501 3-83...
Touch [04 Finisher Adjustment], [08 Perfect Binder Adjustment], and then [02 Cover Lead Edge Adjustment]. The Cover Lead Edge Adjustment Screen will be displayed. Touch [PB Tray] or [Except PB Tray] to select the tray (Main Tray or PB Tray) to feed the cover. 3-84 bizhub PRO C6501...
Page 121
If "All Size" is selected as paper size, the entered adjustment value will be applied to all sizes. If specific paper size is selected, adjustment value will be the sum of the entered value and the value previously specified for "All Size". bizhub PRO C6501 3-85...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [08 Perfect Binder Adjustment], and then [03 Spine Corner Forming Position Adjustment]. The Spine Corner Forming Position Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. 3-86 bizhub PRO C6501...
Page 123
Available range: -128 (down) to +127 (up), 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. Touch [Return] to restore the Perfect Binder Adjustment Menu Screen. bizhub PRO C6501 3-87...
The Pasting Start Position Adjustment Screen will be displayed. Touch [Ahead] or [Back] to select the direction to start pasting. Display the required size key using up/down arrow keys to select the paper size of the body set to be attached with the cover. 3-88 bizhub PRO C6501...
Page 125
If "All Size" is selected as paper size, the entered adjustment value will be applied to all sizes. If specific paper size is selected, adjustment value will be the sum of the entered value and the value previously specified for "All Size". bizhub PRO C6501 3-89...
The Pasting Finish Position Adjustment Screen will be displayed. Touch [Ahead] or [Back] to select the direction to finish pasting. Display the required size key using up/down arrow keys to select the paper size of the body set to be attached with the cover. 3-90 bizhub PRO C6501...
Page 127
If "All Size" is selected as paper size, the entered adjustment value will be applied to all sizes. If specific paper size is selected, adjustment value will be the sum of the entered value and the value previously specified for "All Size". bizhub PRO C6501 3-91...
[06 PasteFormationFinishPos.]. The Paste Formation Finish Position Adjustment Screen will be displayed. Display the required size key using up/down arrow keys to select the paper size of the body set to be attached with the cover. 3-92 bizhub PRO C6501...
Page 129
If "All Size" is selected as paper size, the entered adjustment value will be applied to all sizes. If specific paper size is selected, adjustment value will be the sum of the entered value and the value previously specified for "All Size". bizhub PRO C6501 3-93...
To specify Temperature Adjustment Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [08 Perfect Binder Adjustment], and then [07 Temperature Adjustment]. The Temperature Adjustment Screen will be displayed. 3-94 bizhub PRO C6501...
Page 131
Melt Tank -Low 180 to 190 °C Pasting Roller 160 to 170 °C 1 step = 1 °C Repeat the adjustment steps from 3 to 8 until the desired result is obtained. Touch [Return] to restore the Perfect Binder Adjustment Menu Screen. bizhub PRO C6501 3-95...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [08 Perfect Binder Adjustment], and then [08 Sub Compile CD Width Adj.]. The Sub Compile CD Width Adjustment Screen will be displayed. 3-96 bizhub PRO C6501...
Page 133
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. Touch [Return] to restore the Perfect Binder Adjustment Menu Screen. bizhub PRO C6501 3-97...
Page 134
If "All Size" is selected as paper size, the entered adjustment value will be applied to all sizes. If specific paper size is selected, adjustment value will be the sum of the entered value and the value previously specified for "All Size". 3-98 bizhub PRO C6501...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [08 Perfect Binder Adjustment], and then [09 Clamp CD Width Adjustment]. The Clamp CD Width Adjustment Screen will be displayed. bizhub PRO C6501 3-99...
Page 136
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. Touch [Return] to restore the Perfect Binder Adjustment Menu Screen. 3-100 bizhub PRO C6501...
Page 137
If "All Size" is selected as paper size, the entered adjustment value will be applied to all sizes. If specific paper size is selected, adjustment value will be the sum of the entered value and the value previously specified for "All Size". bizhub PRO C6501 3-101...
[10 Cover Up/Down CD Width]. The Cover Up/Down CD Width Adjustment Screen will be displayed. Touch [Perfect Binder Tray] or [Except PB Tray] to select the tray (Main Tray or PB Tray) to feed the cover. 3-102 bizhub PRO C6501...
Page 139
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. Touch [Return] to restore the Perfect Binder Adjustment Menu Screen. bizhub PRO C6501 3-103...
[11 Clamp FD Position Adj.]. The Clamp FD Position Adjustment Screen will be displayed. Display the required size key using up/down arrow keys to select the paper size of the body set to be attached with the cover. 3-104 bizhub PRO C6501...
Page 141
If "All Size" is selected as paper size, the entered adjustment value will be applied to all sizes. If specific paper size is selected, adjustment value will be the sum of the entered value and the value previously specified for "All Size". bizhub PRO C6501 3-105...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment] and [01Fold & Staple Stopper Adjustment]. The Fold & Staple Stopper Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. 3-106 bizhub PRO C6501...
Page 143
[<<SET]. Available range: -128 (wide) to +127 (narrow), 1 step = 1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. bizhub PRO C6501 3-107...
Page 144
Adjustment If adjustment in any other paper size is required, repeat steps from 3 to Touch [Return] to restore the Adjustment Menu Screen. 3-108 bizhub PRO C6501...
Touch [COPY] tab. The Copy Screen will be displayed. Load the desired size of paper to be adjusted on a tray, specify Multi Center, then press [Start] on the control panel. A sample pattern will be output. bizhub PRO C6501 3-109...
Page 146
When misalignment (a) of step 5 has occurred, enter the "+" value. Repeat the adjustment steps from 3 to 8 until the desired result is obtained. If adjustment in any other size is required, repeat steps 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. 3-110 bizhub PRO C6501...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [03 Punch Adjustment], and then [01 Vertical Position Adj.]. The Vertical Position Adjustment Screen is displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-111...
Page 148
Repeat the adjustment steps from 3 to 8 until the desired result is obtained. If adjustment in any other size is required, repeat steps from 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. 3-112 bizhub PRO C6501...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [03 Punch Adjustment], and then [02 Horizontal Position Adj.]. The Horizontal Position Adjustment Screen is displayed. Select the desired tray. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-113...
Page 150
Repeat the adjustment steps from 3 to 8 until the desired result is obtained. If adjustment in any other tray is required, repeat steps from 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. 3-114 bizhub PRO C6501...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment], [03 Punch Adjustment], and then [03 Registration Adjustment]. The Registration Adjustment Screen is displayed. Select the desired tray. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 3-115...
Page 152
Repeat the adjustment steps from 3 to 8 until the desired result is obtained. If adjustment in any other size is required, repeat steps from 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. 3-116 bizhub PRO C6501...
Touch [04 Finisher Adjustment], [03 Punch Adjustment], and then [04 Paper Edged Detect Sensor Adj.]. The Paper Edged Detect Sensor Adjustment Screen is displayed. Touch [Start]. The adjustment result will be displayed. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-117...
Touch [COPY] tab. The Copy Screen will be displayed. Load the desired size of paper to be adjusted on a tray, specify Tri- Fold, then press [Start] on the control panel. A sample pattern will be output. 3-118 bizhub PRO C6501...
Page 155
Or, if negative value is specified, the folding positions move to the left. Repeat steps 3 to 8 until the desired result is obtained. If adjustment in any other size is required, repeat steps 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-119...
Touch [04 Finisher Adjustment], and then [05 2 Pos. Staple Pitch Adj.]. The 2 Position Staple Pitch Adjustment Screen will be displayed. Select the folding key to be adjusted. Touch [COPY] tab. The Copy Screen will be displayed. 3-120 bizhub PRO C6501...
Page 157
Repeat the adjustment steps from 3 to 8 until the desired result is obtained. If adjustment in any other folding is required, repeat steps from 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-121...
The PI 1 Tray Size Adjustment Screen is displayed. Load the A4 w or 8.5" × 11" w on the Upper tray of the Paper Inserter, and then touch [Start]. Touch [Next] to display the PI 2 Tray Size Adjustment Screen. 3-122 bizhub PRO C6501...
Page 159
Adjustment Load the A4 w or 8.5" × 11" w on the Lower tray of the Paper Inserter, and then touch [Start]. Touch [Return] to restore the Adjustment Menu Screen. bizhub PRO C6501 3-123...
Available settings vary depending on the finisher type mounted on the machine. To specify curl adjustment Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment] and [08 Curl Adjustment]. The Curl Adjustment Screen will be displayed. bizhub PRO C6501 3-125...
Page 162
Adjustment Select the desired curl size to match with the current condition. Touch [OK] to restore the Adjustment Menu Screen. 3-126 bizhub PRO C6501...
Touch [Adjustment] on the Machine Status Screen. The Adjustment Menu Screen will be displayed. Touch [05 Density Unevenness Adj.]. The Density Unevenness Adjustment Setting Screen will be displayed. bizhub PRO C6501 3-127...
Page 164
If the test pattern of the adjusted color only is desired, select [Single Color] or [Black] on the Copy Screen and change the print quantity to 1 before pressing [Start]. Touch [Return] to restore the Adjustment Menu Screen. 3-128 bizhub PRO C6501...
Page 167
[01 System Setting] > [05 Expert Adjustment] > [04 Finisher Adjustment] are exactly the same as the adjustments on the Machine Status Screen by se- lecting [Adjustment] > [04 Finisher Adjustment]. The setting items of Finisher Adjustment vary depending on the optional equipment installed in the machine. bizhub PRO C6501...
Page 168
12* The adjustments accessed by selecting [03 Machine Admin. Setting] > [01 System Setting] > [05 Expert Adjustment] > [08 Execute Adjust Operation] are exactly the same as those on the Machine Status Screen displayed by selecting [Adjustment] > [03 Execute Adjust Operation]. bizhub PRO C6501...
[01]Auto Reset ting Setting [02]Mode Re- set Setting [05]Default Screen Setting [06]Preset Zoom Setting [07]Power Save Setting*3 [08]Time and Date Setting*4 [09]Buzzer Set- [01]Buzzer Vol- ting ume Regulation [02]Buzzer for Job Stop Set [10]Key Re- sponse Time bizhub PRO C6501...
Page 170
Adj.*8 [08]Change Password [03]Machine Admin. [01]System Set- [01]Power Save Setting ting Setting*3 [02]Time and Date Setting*4 [03]Weekly Tim- [01]Weekly Tim- er Setting er On/Off Set [02]Timer Set- ting [03]Timer Ac- tion On/Off Set [04]Lunch Hour Off Setting bizhub PRO C6501...
Page 171
[03]Paper Width (straight) [04]Exit Guide Center Adj. [05]Exit Guide Paper Width [04]Finisher Adjust- [02]Multi Folder [01]Paper Width ment (FD-503) *10 (Punch) Adj. Adjustment [02]Hole-Punch Vertical Pos. [03]Multi Folder [01]Half Fold (Fold) Adj. Position Adj. [02]Tri-Fold-in Pos. Adj. bizhub PRO C6501...
Page 172
(RU-504) *10 [04]Finisher Ad- [08]Perfect Bind- [01]Cover Trim- justment (PB- er Adjustment ming Adjustment 501/PB-502) *10 [02]Cover Lead Edge Adj. [03]Spine Corner forming Adjust- ment [04]Pasting Start Position [05]Pasting Fin- ish Position [06]Paste Forma- tion Finish Pos. bizhub PRO C6501...
Page 173
520/607) [05]Scanner Ad- [01]Restart Tim- justment *11 ing Adjustment [02]Centering Adjustment [03]FD-Mag. Ad- justment [06]Process Ad- [01]Front & Back justment Density [02]Toner Densi- ty Sensor [03]Toner Quan- tity/ Exposure [07]Quality Ad- [01]Printer Gam- justment ma Offset Adj. bizhub PRO C6501...
Page 174
Binding Setting per Weight [02]Paper Count Limit [03]Unfitting Cover Stop [02]Administra- tor Register [03]Scanner [01]Address E-Mail Send Address*1 Edit Group [02]E-Mail Title Setting [03]E-Mail Text Setting [04]User [01]Authentica- Auth./Account tion Method Track [02]User Au- thentication Set 4-10 bizhub PRO C6501...
Page 175
[01]Machine Setting NIC Setting [02]E-Mail Ini- tial Setting [06]Common Setting*5 [07]Copy Set- ting*6 [08]Scan Set- ting*7 [09]System [01]Administra- Connection [10]Security [01]Administra- Setting tor Password [02]HDD Lock Password [03]Overwrite image data [04]Security Strengthen Set [04]Touch Screen Adjustment bizhub PRO C6501 4-11...
Specify the paper type which is to be selected in the Fan Heater Control(Tray4): ATS function. Automatic Dryness preparation: on/off Fan Heater Control (Tray5): Fan Heater Control (Tray4): Automatic/ On (compulso- Automatic ry)/ Off (compulsory) Fan Heater Control (Tray5): Automatic/ On (compulso- ry)/ Off (compulsory) 4-12 bizhub PRO C6501...
Page 177
On/ Off, Big/ Small 02 Buzzer for Job Stop Set Select the duration of the buzzer sound when the ma- chine stops due to no paper and mishandled paper. Off/ 3 seconds/ 5 seconds/ 10 seconds bizhub PRO C6501 4-13...
Page 178
Specify the initial values for the copy functions when the machine is reset to the initial setting, such as by pressing [Reset] on the control panel. Copy Initial setting (Original Setting/ Color/ Zoom/ Applica- tion/ Quality Adjust./ Output Appli./ Simplex/ Duplex/ Paper Setting/ ADF) 4-14 bizhub PRO C6501...
Page 179
(Black mode). Off/ On Printer Job Stacker Pile Permission Specify whether or not to allow paper from several printer jobs to pile up in the large capacity stacker LS-505. Permission/ Prohibition bizhub PRO C6501 4-15...
Page 180
Set the timing to interrupt the present job when pressing [Interrupt] while copying. Stop Immediately/ When Current Comp. Change Page Print Pos. (Booklet) Set the page number position when using Booklet with Page Numbering in Stamp. Off/ On (Outside Print) 4-16 bizhub PRO C6501...
Page 181
Strong+/ Normal/Weak+ 02Thin Line Enhancement Normal Specify the level of thin line enhancement for printing. Strong+/ Strong/ Normal/ Weak/ Weak+ 03 Reversed Text Enhancement Normal Specify the level of reversed text enhancement for printing. Strong+/ Normal/ Weak+ bizhub PRO C6501 4-17...
Page 182
Adj. Range: -5~+5 05 Density Unevenness Adj. Adj. Range: 0 Adjust the density unevenness of printed images. Adj. Range: -32~+31 08 Change Password Change a user password which the user has registered for user authentication. Enter new password 4-18 bizhub PRO C6501...
Change User Lens Mode: Lens Mode], and [Change Program Image Overlay]. Permission • Change Send Address: Permission/ Prohibition Change Program Image • Change User Lens Mode: Permission/ Prohibition Overlay: Prohibition • Change Program Image Overlay: Permission/ Prohi- bition bizhub PRO C6501 4-19...
Page 184
0.1mm) • Paper Width (straight): -20 to +20 (1 step = 0.1mm) • Exit Guide Center Adj.: -50 to +50 (1 step = 0.1mm) • Exit Guide Paper Width: -50 to +50 (1 step = 0.1mm) 4-20 bizhub PRO C6501...
Page 185
• Trimming Adjustment:-400 to +400 (1 step = 0.1mm) • Trimmer Receiver Adj.: Trimmer Count, Move Pitch, Execute Compulsive Movement 07 RU Adjustment Adjust the settings related to the Relay Unit RU- 504. Curl Reform Direction: Off/ Upper/ Lower bizhub PRO C6501 4-21...
Page 186
Fold mode. -128 to +127 (1 step = 0.1mm) 05 2 Position Staple Pitch Adjustment (FS-607 Only) Adjust the staple pitch in Staple and Fold & Sta- ple modes. -128 to +160 (1 step = 1mm) 4-22 bizhub PRO C6501...
Page 187
Full size/ AB/ Inch/ Only A series 02 ADF Original Size Detect Only A series Specify the size of the originals which needs to be de- tectable on the ADF. Full size/ AB/ Inch/ Only A series bizhub PRO C6501 4-23...
Page 188
08 Perfect Binding Setting 01 Useful Paper Weight Book Body: Specify the paper weight available for each of body 64-74g/m / 75-80g/m / 81- and cover when using Perfect Binder. 105g/m Book Cover: 81-105g/m / 106-135g/m 136-162g/m 4-24 bizhub PRO C6501...
Page 190
Select the SHOT indication time to be displayed in the mes- sage indication area of the touch panel. 3 seconds/ 5 seconds Job Offset Mode Set the machine to offset the copies/printouts of different jobs. On/ Off 4-26 bizhub PRO C6501...
Page 191
On/ Off Auto Detect Orig. Size in ADF Set the machine to automatically select the same size of copy paper as the original placed on the ADF. On/ Off bizhub PRO C6501 4-27...
Page 192
APS Tray Select the tray to be automatically selected when APS is re- leased. APS Tray/ Tray1/ Tray2/ Tray3/ Tray4/ Tray5 Scan prohibit (pull out tray) Set to stop scanning when pulling out the tray. On/ Off 4-28 bizhub PRO C6501...
Page 193
02 HDD Lock Password Change the password when accessing data stored in HDD. 03 Overwrite image data Specify whether to overwrite image data. Yes/ No 04 Security Strengthen Set Set the Security Strengthen mode. On/ Off bizhub PRO C6501 4-29...
Administrator password. This section describes the user setting. How to display User Setting Menu Screen Press the [Utility/Counter] on the control panel. The Utility Menu Screen will be displayed. bizhub PRO C6501...
Page 198
User Setting Touch [User Setting]. The User Setting Menu Screen will be displayed. bizhub PRO C6501...
Page 199
How to use [Close], layer keys, and [Exit] Touch [Close] to return to the previous screen. Touch the desired layer key on the left side area of the screen to jump to that screen. Touch [Exit] to restore the Copy Screen. bizhub PRO C6501...
Select the language used in the touch panel. The initial setting is English. Procedure Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [01 System Setting], and then [01 Language Setting]. Select the desired language key to highlight it. bizhub PRO C6501...
Page 201
User Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501...
Select the desired unit key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501...
User Setting 5.2.3 03 Feed Tray Setting \ 01 Paper Setting Please refer to Paper Setting in Section 2 for the overview of, and instruction on, setting paper. bizhub PRO C6501...
Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [01 System Setting], [03 Feed Tray Setting], and then [02 Feed Tray Auto Selection]. Touch to highlight the desired tray key under ATS/APS Switch. 5-10 bizhub PRO C6501...
Page 205
(c) and (d). Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Feed Tray Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-11...
Touch [On] when ATS is used, and [Off] when ATS is not used. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Feed Tray Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-12 bizhub PRO C6501...
Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [01 System Setting], [03 Feed Tray Setting], and then [04 Auto Paper Type]. Select the paper type of the tray which is automatically selected when ATS functions. bizhub PRO C6501 5-13...
Page 208
Switch the displayed unit for weight by touching [Unit Change]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Feed Tray Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-14 bizhub PRO C6501...
To enable the dryness preparation function, touch [On], otherwise touch [Off]. The selection becomes highlighted. – Select [Automatic], [On (compulsory)], or [Off (compulsory)] to control the fun heater attached to each tray of the Paper Feeder Unit. bizhub PRO C6501 5-15...
Page 210
User Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Feed Tray Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-16 bizhub PRO C6501...
Reset is activated. Procedure Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [01 System Setting], [04 Reset Setting], and then [01 Auto Reset Setting]. Select the desired time to highlight it. bizhub PRO C6501 5-17...
Page 212
User Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-18 bizhub PRO C6501...
Select to reset or not when inserting the key counter or magnetic card of the data controller. Status Hold When Auto Reset When Reset functions select to reset the Platen/ADF mode to the initial setting, or save the previous setting. bizhub PRO C6501 5-19...
Page 214
Original Screen and the binding position setting made on the Output Mode Screen after completion of each copying job. Procedure Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [01 System Setting], [04 Reset Setting], and then [02 Mode Reset Setting]. 5-20 bizhub PRO C6501...
Page 215
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-21...
[Copy]: Copy Screen will be displayed. Procedure Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [01 System Setting], and then [05 Default Screen Setting]. Select the desired initial screen to highlight it. 5-22 bizhub PRO C6501...
Page 217
User Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-23...
Touch [01 System Setting], and then [06 Preset Zoom Setting]. Touch the desired preset zoom key (from 1 to 3) and display the desired zoom ratio on the right side of the keys using the touch panel keypad. 5-24 bizhub PRO C6501...
Page 219
User Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-25...
OFF/ 1 min. / 30 min. / 60 min. / 90 min. / 120 min. / 240 min. Procedure Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [01 System Setting], and then [07 Power Save Setting]. 5-26 bizhub PRO C6501...
Page 221
If the Auto Shut Off function is disabled, select [---min.]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-27...
Page 222
If the period of time selected for Auto Shut Off is shorter than that of for Auto Low Power, the period of time for Auto Low Power will be forcibly reset to the same period of time as Auto Shut Off. Auto Low Power will not function. 5-28 bizhub PRO C6501...
(in 24-hour expression). – Enter the time by using the touch panel keypad. – Touch [Set] to move the highlighted section to the number to be changed. Repeat the same procedure for month, date, and time. bizhub PRO C6501 5-29...
Page 224
Touch [OK] to return to the Time and Date Setting Screen. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-30 bizhub PRO C6501...
Select the duration of the buzzer sound when the machine stops due to no paper and mishandled paper. Procedure Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [01 System Setting], [09 Buzzer Setting], and then [01 Buzzer Volume Regulation]. bizhub PRO C6501 5-31...
Page 226
Touch [Off] to highlight it. The buzzer will go off. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. Touch [02 Buzzer for Job Stop Set]. 5-32 bizhub PRO C6501...
Page 227
Select the desired time to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Buzzer Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-33...
Select the desired time to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-34 bizhub PRO C6501...
Screen. Touch [01 System Setting], and then [11 Short cut Key Setting]. To display the short cut keys under [Application] on the Copy Screen, touch [01 Application] to display the Short Cut Key Setting Screen (Application). bizhub PRO C6501 5-35...
Page 230
Copy Screen, touch [02 Quality Adjust. (Copy) ]to display the Short Cut Key Setting Screen (Quality). – Touch appropriate keys to select up to 3 short cuts for [Quality Adjust.]. Touch [OK] to complete the setting. The Short Cut Key Setting Menu Screen will be restored. 5-36 bizhub PRO C6501...
Page 231
Area Set] to display the Short Cut Key Setting Screen (Quality) – Select either [Short Cut Display] or [Density Setting Display]. Touch [OK] to complete the setting. The Short Cut Key Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-37...
Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [01 System Setting], and then [12 Service Port Device]. Select either [On] or [Off]. – When selecting [On], touch [Keyboard Type] to select a keyboard type. 5-38 bizhub PRO C6501...
Page 233
To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. Note When using the service port device, contact your service representative. bizhub PRO C6501 5-39...
Reset Setting \ 02 Mode Reset Setting], and then select [Initial] for the Reset button function and [OFF] for the Mode memory auto call. Procedure Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [02 Initial Setting], and then [01 Copy Initial setting]. 5-40 bizhub PRO C6501...
Page 235
[ADF] to select the ADF mode as the initial setting. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-41...
04 Reset Setting \ 02 Mode Reset Setting], and then select [Initial] for the Reset button function. Procedure Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [02 Initial Setting], and then [02 Scan Initial setting]. 5-42 bizhub PRO C6501...
Page 237
[ADF] to select the ADF mode as the initial setting. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-43...
Priority Paper Type Select whether to maintain the Temperature which is suited for the coated paper by turning the fixing unit roller. Others/Coated Paper Un-compressing mode Specify when storing to HDD is not completed with memory overflow. Off/On 5-44 bizhub PRO C6501...
Page 239
Thick Paper BK Mode key is not display normally. If the adjustment is provided, contact your service representative. Printer Job Stacker Pile Specify whether or not to allow paper from several printer jobs to pile up in the large capacity stacker LS-505. Permission/Prohibition bizhub PRO C6501 5-45...
Page 240
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-46 bizhub PRO C6501...
Set the machine to automatically select an appropriate ratio for copying when detecting the original size placed on the ADF. On/Off Non-Image Area Erase of orig Specify the conditions to be applied to [Non-Image Area Erase of orig]. Yes/ APS/AMS /Except Orig. Glass (1:1) bizhub PRO C6501 5-47...
Page 242
Set the machine to conform the binding direction of the originals and printed sets each other. On/Off Choose Default Tray when APS Off Select the tray to be automatically selected when APS is released. APS Tray/Tray1/Tray2/Tray3/Tray4/Tray5 5-48 bizhub PRO C6501...
Page 243
Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [04 Copy Setting]. Touch the desired key to each item on the left side of the screen. – There are five setting screens. Touch [Next] and [Previous] to switch between the screens. bizhub PRO C6501 5-49...
Page 244
User Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-50 bizhub PRO C6501...
Packaged TIFF/Divided TIFF/Packaged PDF/JPEG Default Address Select the default destination to be displayed when selecting the Scanner Screen. E-Mail/HDD/FTP/SMB/QUEUE Compress Method Color/Gray Select the default destination to be displayed when selecting the Scanner Screen. High Compress/Standard/Low Compress bizhub PRO C6501 5-51...
Page 246
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-52 bizhub PRO C6501...
03 Reversed Text Enhancement Specify the level of reversed text enhancement for printing. Strong+/Normal/Weak+ 04 Blur Prevention Specify whether to use the function to prevent blur for lines which is caused by thin line enhancement. Off/On bizhub PRO C6501 5-53...
Page 248
Touch [06 Printer Setting], and then [01 Gray Text Outline Enhance]. Select the desired key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Printer Setting Menu Screen will be restored. 5-54 bizhub PRO C6501...
Page 249
Touch [06 Printer Setting], and then [02 Thin Line Enhancement]. Select the desired key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Printer Setting Menu Screen will be restored. bizhub PRO C6501 5-55...
Page 250
Touch [06 Printer Setting], and then [03 Reserved Text Enhancement]. Select the desired key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Printer Setting Menu Screen will be restored. 5-56 bizhub PRO C6501...
Page 251
Select the desired key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Printer Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-57...
Dot 1: Permission/Prohibition Dot 2: Permission/Prohibition Procedure Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [07 Image Quality Setting], and then [01 Screen]. Select the desired key to highlight it. 5-58 bizhub PRO C6501...
Page 253
User Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Image Quality Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-59...
Single Color-Text/Photo: Line 1/Line 2/Dot 1/Dot 2/Compression Single Color-Photo: Line 1/Line 2/Dot 1/Dot 2/Compression Procedure Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [07 Image Quality Setting], and then [02 Screen Initial setting]. 5-60 bizhub PRO C6501...
Page 255
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Image Quality Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-61...
Touch [07 Image Quality Setting], and then [03 Original Density shift]. Display the required item using up/down arrow keys, and touch it. Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: 0 to +6 5-62 bizhub PRO C6501...
Page 257
User Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Image Quality Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-63...
Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [07 Image Quality Setting], and then [04 ACS adjustment]. Place the original onto the original glass, and touch [Scan]. Scanned result is displayed in the message area. 5-64 bizhub PRO C6501...
Page 259
Repeat the adjustment steps from 3 to 4 until the desired result is obtained. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Image Quality Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 5-65...
Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [07 Image Quality Setting], and then [05 Density Unevenness Adj.]. 5-66 bizhub PRO C6501...
Page 261
Color is specified as default color setting. If the test pattern of the adjusted color only is desired, select [Single Color] or [Black] on the Copy Screen and change the print quantity to 1 before pressing [Start]. bizhub PRO C6501 5-67...
Page 262
User Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Image Quality Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-68 bizhub PRO C6501...
The changed password is reflected to the user authentication setting description. Procedure Follow the procedure on page 5-3 to display the User Setting Menu Screen. Touch [08 Change Password]. Enter current password, then touch [OK]. bizhub PRO C6501 5-69...
Page 264
Be sure to make the user authentication before accessing the User Setting Screen. The user password can not be changed without any user authentication made or if logged in user is different from the one who wants to change the password. 5-70 bizhub PRO C6501...
Administrator password. Contact your service representative for setting the password. How to access the Machine Administrator Setting Screen Press the [Utility/Counter] on the control panel. The Utility Menu Screen will be dis- played. bizhub PRO C6501...
Page 268
Machine Administrator Setting Touch [03 Machine Admin. Setting]. – If the Password Input Screen is displayed, enter the eight-digit ma- chine administrator password, then touch [OK]. bizhub PRO C6501...
Page 269
How to use [Close], layer keys, and [Exit] Touch [Close] to return to the previous screen. Touch the desired layer key on the left side area of the screen to jump to that screen. Touch [Exit] to restore the Copy Screen. bizhub PRO C6501...
OFF / 1 min. / 30 min. / 60 min. / 90 min. / 120 min. / 240 min. Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], and then [01 Power Save Setting]. bizhub PRO C6501...
Page 271
Machine Administrator Setting Power Save Setting Screen will be displayed. Detail The following operation is equivalent to selecting [User Setting \ 01 Sys- tem Setting \ 07 Power Save Setting]. Please refer to page 5-26 for more information. bizhub PRO C6501...
Time and Date Setting Screen will be displayed. Detail The following operation is equivalent to selecting [User Setting \ 01 Sys- tem Setting \ 08 Time and Date Setting]. Please refer to page 5-29 for more information. bizhub PRO C6501...
- The current date and time are correctly set. Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [03 Weekly Timer Setting], and then [01 Weekly Timer On/Off Set]. bizhub PRO C6501...
Page 274
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Weekly Timer Setting Menu Screen will be restored. If further changes are required, touch the desired key. 6-10 bizhub PRO C6501...
On and Off times will not turn on the machine even if the timer is set operational. Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [03 Weekly Timer Setting], and then [02 Timer Setting]. bizhub PRO C6501 6-11...
Page 276
– User the touch panel keypad to enter the On time, and then touch [Set]. The Off time for the day becomes highlighted. – When setting Sunday Off-time, Monday On-time is highlighted again. 6-12 bizhub PRO C6501...
Page 277
(ex. 7 min. is 07) using the touch panel keypad, and then touch Set. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Weekly Timer Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-13...
The default setting is collective: On for Mondays through Saturdays, and Off for Sundays. Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [03 Weekly Timer Set], and then [03 Timer Action On/Off Set]. 6-14 bizhub PRO C6501...
Page 279
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Weekly Timer Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-15...
The factory default setting is Function Invalid. Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [03 Weekly Timer Setting], and then [04 Lunch Hour Off Setting]. 6-16 bizhub PRO C6501...
Page 281
Touch [Function Invalid] to deactivate the Lunch Hour Off function. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Weekly Timer Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-17...
Timer Interrupt Password Set]. Use the touch panel keypad to enter a four-digit password. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Weekly Timer Setting Menu Screen will be restored. 6-18 bizhub PRO C6501...
Page 283
When the password setting is 0000, Timer Interrupt can be used simply by pressing [Power Save] on the control panel, then on. In this case, you will be asked to enter the duration of use (a period of time to turn the ma- chine power on). bizhub PRO C6501 6-19...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [04 Operation Prohibit Set], and then [01 Lock/Delete Mode Memory]. Touch [Copy Mode Memory] or [Scan Mode Memory]. 6-20 bizhub PRO C6501...
Page 285
Mode memory. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Lock/Delete Mode Memory Menu Screen will be re- stored. If further changes are required, touch the desired key. bizhub PRO C6501 6-21...
Permit/prohibit to delete or overwrite a title of programmed overlay im- age. Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [04 Operation Prohibit Set], and then [02 Change Prohibit Setting]. 6-22 bizhub PRO C6501...
Page 287
Touch to highlight [Permission] or [Prohibition] for each item. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-23...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [04 Operation Prohibit Set], and then [03 Scanner Prohibit Setting]. Touch to highlight [Permit] or [Prohibit] for each item. 6-24 bizhub PRO C6501...
Page 289
Machine Administrator Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Operation Prohibit Setting Menu Screen will be re- stored. If further changes are required, touch the desired key. bizhub PRO C6501 6-25...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], and then [01 AES Level Adjustment]. Touch appropriate keys to set required levels separately for [Color] and [Black]. 6-26 bizhub PRO C6501...
Page 291
Machine Administrator Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Expert Adjustment Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-27...
Use this function to select the erase mode, and set the density level of the original (five levels). The default setting is Auto. 03 ADF Frame Erase Set Frame Erase to function anytime when copying in ADF mode, and set the amount of the outside area to be deleted. 6-28 bizhub PRO C6501...
Page 293
Touch [01 Non-Image Area Erase]. – Touch the desired key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Operation Prohibit Setting Menu Screen will be re- stored. bizhub PRO C6501 6-29...
Page 294
[None] if deleting the outside area is not necessary. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Expert Adjustment Menu Screen will be restored. If further changes are required, touch the desired key. 6-30 bizhub PRO C6501...
Perform this adjustment after completing FD-Mag. Adjustment. Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [03 Printer Adjust- ment], and then [01 Restart Timing Adjustment]. bizhub PRO C6501 6-31...
Page 296
Machine Administrator Setting The Restart Timing Adjustment Screen will be displayed. Detail Please refer to page 3-3 for the details on the subsequent operations. 6-32 bizhub PRO C6501...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [03 Printer Adjust- ment], and then [02 Centering Adjustment]. The Centering Adjustment Screen will be displayed. bizhub PRO C6501 6-33...
Page 298
Machine Administrator Setting Detail Please refer to page 3-6 for the details on the subsequent operations. 6-34 bizhub PRO C6501...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [03 Printer Adjust- ment], and then [03 FD-Mag. Adjustment]. The FD-Mag. Adjustment Screen will be displayed. bizhub PRO C6501 6-35...
Page 300
Machine Administrator Setting Detail Please refer to page 3-8 for the details on the subsequent operations. 6-36 bizhub PRO C6501...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [03 Printer Adjust- ment], and then [04 CD-Mag. Adjustment]. The CD-Mag. Adjustment Screen will be displayed. bizhub PRO C6501 6-37...
Page 302
Machine Administrator Setting Detail Please refer to page 3-11 for the details on the subsequent operations. 6-38 bizhub PRO C6501...
Touch [01 System Setting], [05 Expert Adjustment], [03 Printer Adjust- ment], and then [05 Lead Edge Erase Adjustment]. The Lead Edge Erase Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 6-39...
Page 304
Available range: -20 to +40, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 7 until the desired result is ob- tained. Touch [Return] to restore the Printer Adjustment Menu Screen. If further changes are required, touch the desired key. 6-40 bizhub PRO C6501...
Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [03 Printer Adjust- ment], and then [06 Registration Loop Adj.]. The Registration Loop Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 6-41...
Page 306
Available range: -99 to +99, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is ob- tained. Touch [Return] to restore the Printer Adjustment Menu Screen. If further changes are required, touch the desired key. 6-42 bizhub PRO C6501...
Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [03 Printer Adjust- ment], and then [07 Pre-registration Adj.]. The Pre-registration Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 6-43...
Page 308
Available range: -20 to +40, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is ob- tained. Touch [Return] to restore the Printer Adjustment Menu Screen. If further changes are required, touch the desired key. 6-44 bizhub PRO C6501...
Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], and then [04 Fin- isher Adjustment]. The Finisher Adjustment Screen will be displayed. Detail Please refer to page 3-21 for the details on the subsequent operations. bizhub PRO C6501 6-45...
Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], and then [05 Scan- ner Adjustment]. The Scanner Adjustment Screen will be displayed. Detail Please refer to page 3-13 for the details on the subsequent operations. 6-46 bizhub PRO C6501...
Touch the required item key. Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -3 to +3 bizhub PRO C6501 6-47...
Page 312
Machine Administrator Setting Touch [Return] to restore the Process Adjustment Menu Screen. If further changes are required, touch the desired key. 6-48 bizhub PRO C6501...
[02 Toner Density Sensor]. Touch [Start] to display the value of toner density sensor. – To cancel the sensor, touch [Stop]. Touch [Return] to restore the Process Adjustment Menu Screen. If further changes are required, touch the desired key. bizhub PRO C6501 6-49...
[03 Toner Quality/Exposure]. Touch [Next] or [Previous] to display the relevant screen for the color you want to adjust. Touch appropriate level keys under [Toner Quality] and [Exposure] to specify toner quantity and exposure. 6-50 bizhub PRO C6501...
Page 315
Repeat the adjustment steps from 3 to 4 until the desired result is ob- tained. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Process Adjustment Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-51...
Touch [01 System Setting], [05 Expert Adjustment], [07 Quality Adjust- ment], and then [01 Printer Gamma Offset Adj.]. The Printer Gamma Offset Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. 6-52 bizhub PRO C6501...
Page 317
[<<SET]. Repeat the adjustment steps from 3 to 6 until the desired result is ob- tained. Touch [Return] to restore the Process Adjustment Menu Screen. If further changes are required, touch the desired key. bizhub PRO C6501 6-53...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [07 Quality Adjust- ment], and then [02 Printer Gamma Offset Auto Adj.]. The Printer Gamma Offset Automatic Adjustment Screen will be dis- played. 6-54 bizhub PRO C6501...
Page 319
Select A4 v/8.5" × 11" v paper, then press [START] on the control pan- The test chart will be output. The Printer Gamma Offset Automatic Ad- justment Screen will be restored. Touch [Next] or [Previous] to display the relevant screen on which you want to make adjustments. bizhub PRO C6501 6-55...
Page 320
Touch [YES] to reset the adjustment value to the factory setting, or touch [NO] to cancel. Touch [Return] to restore the Quality Adjustment Menu Screen. If further changes are required, touch the desired key. 6-56 bizhub PRO C6501...
Touch [01 System Setting], [05 Expert Adjustment], [07 Quality Adjust- ment], and then [03 Printer Gamma Sensor Adj.]. The Printer Gamma Offset Automatic Adjustment Screen will be dis- played. Touch [COPY] tab. The Copy Screen will be displayed. bizhub PRO C6501 6-57...
Page 322
The message "Completed" will be displayed. If an error code (Error 1, 2, or 10) is displayed, check that the test chart is placed properly. If any other error code is displayed, please contact your service repre- sentative. 6-58 bizhub PRO C6501...
Page 323
Touch [YES] to reset the adjustment value to the factory setting, or touch [NO] to cancel. Touch [Return] to restore the Quality Adjustment Menu Screen. If further changes are required, touch the desired key. bizhub PRO C6501 6-59...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [07 Quality Adjust- ment], and then [04 Image Quality Stability]. The Image Quality Stability Screen will be displayed. 6-60 bizhub PRO C6501...
Page 325
Adjustment operations can be set to the jobs whose priority is set to [Stability]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Quality Adjustment Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-61...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [07 Quality Adjust- ment], and then [05 Custom Screen]. The Custom Screen Setting Screen will be displayed. 6-62 bizhub PRO C6501...
Page 327
Screen to display the Copy Screen. The gamma automatic adjustment will be performed. After the gamma adjustment is complete, adjust the printer gamma off- set setting for the screen which was modified in the machine adminis- trator setting. bizhub PRO C6501 6-63...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], and then [08 Exe- cute Adjust Operation]. The Execute Adjustment Operation Screen will be displayed. Touch an appropriate key to select the adjustment operation. 6-64 bizhub PRO C6501...
Page 329
Machine Administrator Setting Touch [OK] to complete the operation. – To cancel the change, touch [Cancel]. In either case, the Expert Adjustment Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-65...
Font patterns used in the machine - Audit log report: Audited log Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], and then [06 List/Count]. 6-66 bizhub PRO C6501...
Page 331
Press [Start] on the control panel to start printing the selected list. To suspend printing, press [Stop]. Touch [UTILITY] tab to return to the List Print Screen. Touch Return to restore the Machine Administrator Setting Menu Screen. If further changes are required, touch the desired key. bizhub PRO C6501 6-67...
Folding Unit FD-503 so as to prevent other similar siz- es from being detected instead. Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 System Setting], and then [07 Size Setting]. 6-68 bizhub PRO C6501...
Page 333
Touch [01 Orig. Glass Size Detect]. – Touch the desired key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Size Setting Menu Screen will be restored. bizhub PRO C6501 6-69...
Page 334
Touch [03 Orig.Glass Minimum Detect]. – Touch the desired size key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Size Setting Menu Screen will be restored. 6-70 bizhub PRO C6501...
Page 335
Touch [05 ADF/Orig. Glass Priority]. – Touch the desired size key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Size Setting Menu Screen will be restored. bizhub PRO C6501 6-71...
Page 336
Touch the desired size key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Size Setting Menu Screen will be restored. If further changes are required, touch the desired key. 6-72 bizhub PRO C6501...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [01 System Setting], and then [08 Perfect Binding Setting]. The Perfect Binding Setting Menu Screen will be displayed. Touch [01 Useful Paper Weight]. The Useful Paper Weight Screen will be displayed. bizhub PRO C6501 6-73...
Page 338
If further changes are required, touch the desired key. Note If one of the paper weight selected here is not specified for the tray to be used in the perfect binding mode, the binding operation will become unavailable with an "unsuitable" message displayed. 6-74 bizhub PRO C6501...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [01 System Setting], and then [08 Perfect Binding Setting]. The Perfect Binding Setting Menu Screen will be displayed. Touch [02 Paper Count Limit]. The Paper Count Limit Screen will be displayed. bizhub PRO C6501 6-75...
Page 340
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Perfect Binding Setting Menu Screen will be re- stored. If further changes are required, touch the desired key. 6-76 bizhub PRO C6501...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [01 System Setting], and then [08 Perfect Binding Setting]. The Perfect Binding Setting Menu Screen will be displayed. Touch [03 Unfitting Cover Stop]. The Unfitting Cover Stop Screen will be displayed. bizhub PRO C6501 6-77...
Page 342
Touch [Temporary Stop] or [Not Temporary Stop] to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Perfect Binding Setting Menu Screen will be re- stored. If further changes are required, touch the desired key. 6-78 bizhub PRO C6501...
The Machine Administrator Registration Screen will be displayed. Touch [Name Input] to display the Machine Administrator Name Input Screen. Use the touch panel keypad to register the machine adminis- trator name. The eight characters including a hyphen (-) can be en- tered. bizhub PRO C6501 6-79...
Page 344
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Machine Administrator Setting Menu Screen will be restored. If further changes are required, touch the desired key. 6-80 bizhub PRO C6501...
The Group of registered addresses can be added, changed or deleted. Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [01 Scanner Send Address], and then [01 Address Edit]. The Register/Edit Destination Address Screen will be displayed. bizhub PRO C6501 6-81...
Page 346
Screen. Touch [Address] and display the screen for input. Repeat this oper- ation for [Register Name] and [Search Character]. Set Daily Use by touching [On] or [Off]. Touch [OK] to restore the Register/Edit Destination Address Screen. 6-82 bizhub PRO C6501...
Page 347
Touch [Change] to display the Input Destination Address Screen. Select the changing item from [Address], [Register Name] and [Search Character], and change it in the input screen. Set Daily Use by touching [On] or [Off]. Touch [OK] to restore the Register/Edit Destination Address Screen. bizhub PRO C6501 6-83...
Page 348
Add, change or delete the HDD destination address. – To add the HDD destination address: Touch [HDD], and touch [Add] to display the Input Destination Ad- dress Screen. Touch [Box Name] and display the screen for input. 6-84 bizhub PRO C6501...
Page 349
Touch [Change] to display the Input Destination Address Screen. Select the changing item from [Address], [Name] and [Reference Name], and change it in the input screen. Set Daily Use by touching [On] or [Off]. bizhub PRO C6501 6-85...
Page 350
(d) to display the Register Name to be deleted, and touch to high- light it. Touch [Delete]. The Delete Confirmation popup screen will be dis- played. Touch [Yes]. To suspend deleting, touch [No]. Touch [OK] to restore the Register/Edit Destination Address Screen. 6-86 bizhub PRO C6501...
Page 351
Name] and [Password]. Touch [Anonymous] to log in as anony- mous. The port number is assigned automatically. Select proxy by touching [On] or [Off]. Set Daily Use by touching [On] or [Off]. Touch [OK] to restore the Register/Edit Destination Address Screen. bizhub PRO C6501 6-87...
Page 352
[Host Address], [File Path], [Login Name] and [Password], and change it in the input screen. Select proxy by touching [On] or [Off]. Set Daily Use by touching [On] or [Off]. Touch [OK] to restore the Register/Edit Destination Address Screen. 6-88 bizhub PRO C6501...
Page 353
(d) to display the Register Name to be deleted, and touch to high- light it. Touch [Delete]. The Delete Confirmation popup screen will be dis- played. Touch [Yes]. To suspend deleting, touch [No]. Touch [OK] to restore the Register/Edit Destination Address Screen. bizhub PRO C6501 6-89...
Page 354
Touch [Register Name] and display the screen for input. Repeat this operation for [Search Character], [Host Address], [File Path], [Login Name] and [Password]. Set Daily Use by touching [On] or [Off]. Touch [OK] to restore the Register/Edit Destination Address Screen. 6-90 bizhub PRO C6501...
Page 355
Select the changing item from [Register Name], [Search Character], [Host Address], [File Path], [Login Name] and [Password], and change it in the input screen. Set Daily Use by touching [On] or [Off]. Touch [OK] to restore the Register/Edit Destination Address Screen. bizhub PRO C6501 6-91...
Page 356
Touch [Yes]. To suspend deleting, touch [No]. Touch [OK] to restore the Register/Edit Destination Address Screen. Add, change or delete Group. – To add Group Touch [Group], and touch [Add] to display the Register/ Edit Desti- nation Address Screen. 6-92 bizhub PRO C6501...
Page 357
[HDD], [FTP], or [SMB] is not permitted for a single group. Touch [List] to view the e-mail address, HDD, FTP, and SMB which have been selected. Touch [OK] to return to the Destination List Screen. Touch [OK] to restore the Register/Edit Destination Address Screen. bizhub PRO C6501 6-93...
Page 358
Touch [List] to view the e-mail address, HDD, FTP, and SMB which have been selected. Touch [OK] to return to the Destination List Screen. Touch [OK] to restore the Register/Edit Destination Address Screen. 6-94 bizhub PRO C6501...
Page 359
Touch [Delete]. The Delete Confirmation popup screen will be dis- played. Touch [Yes]. To suspend deleting, touch [No]. Touch [Return] to restore the Scan Send Address Menu Screen. If further changes are required, touch the desired key. bizhub PRO C6501 6-95...
Touch [01 Scanner Send Address], and then [02 E-Mail Title Setting]. The E-Mail Title Setting Screen will be displayed. Input the E-Mail title. – Touch an appropriate key by selecting from [1] to [5] to display the screen to input appropriate titles, and then touch [OK]. 6-96 bizhub PRO C6501...
Page 361
Machine Administrator Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Scan Send Address Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-97...
[OK]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Scan Send Address Menu Screen will be restored. If further changes are required, touch the desired key. 6-98 bizhub PRO C6501...
Detail It is recommended to distribute authentication for both the user and the section, otherwise either party cannot be assigned authentication if it is distributed to only one party. bizhub PRO C6501 6-99...
Page 364
User", "Account Track", "Account Track Auth. Method", and "Us- er/Section Auth. Connect". Touch [User Distribute Number] to display the touch panel keypad. – Enter the number to distribute using the keypad or the arrow keys (c) and (d), then touch [OK]. 6-100 bizhub PRO C6501...
Page 365
Limit Achieve Movement". Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the User Auth./Account Track Menu Screen will be re- stored. If further changes are required, touch the desired key. bizhub PRO C6501 6-101...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [04 User Auth./Account Track], [02 User Authentication Set], and then [01 Management Setting]. The Management Setting Screen will be displayed. 6-102 bizhub PRO C6501...
Page 367
Touch [Upper] to display the keypad which can be used to enter the upper limit. – Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. – In either case, the Management Setting Screen will be restored. bizhub PRO C6501 6-103...
Page 368
Machine Administrator Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the User Authentication Setting Screen will be restored. If further changes are required, touch the desired key. 6-104 bizhub PRO C6501...
Setting Menu Screen. Touch [04 User Auth./Account Track], [02 User Authentication Set], and then [02 User Register]. The User Registration Screen will be displayed. Follow the instructions below for adding, changing and deleting the user setting. bizhub PRO C6501 6-105...
Page 370
[OK]. You may enter 64 digits for the password. For the details on entering texts in the input screen, see the appendix. Touch [Belong Section] to display the screen to select a section be- long to. 6-106 bizhub PRO C6501...
Page 371
Touch [Upper] to display the keypad which can be used to enter the upper limit. Touch [Copy], [Scanner], or [Printer] in the "Useable Function" to specify the functions made available to the user. bizhub PRO C6501 6-107...
Page 372
[OK]. Touch [Color] or [Black] in the "Output Permission" to select the type of printing operation made available to the user. Touch [Upper Limit Set] to display the Upper Limit Setting Screen. 6-108 bizhub PRO C6501...
Page 373
Touch [From Address] to display the screen for entering the From address. Select an appropriate address or register a new address, and then touch [OK]. Touch [OK] to complete the setting. – To delete user settings: bizhub PRO C6501 6-109...
Page 374
Machine Administrator Setting Touch [Next] or [Previous] to display the user name to be deleted and touch to highlight it. Touch [Delete] to display the Delete Confirmation popup menu. Touch [Yes] to delete, or touch [No] to cancel. 6-110 bizhub PRO C6501...
Page 375
Touch [Upper] to display the keypad which can be used to enter the upper limit. Touch [Copy], [Scanner], or [Printer] in the "Useable Function" to specify the functions made available to all users. Touch [OK] to complete the setting. bizhub PRO C6501 6-111...
Page 376
Machine Administrator Setting Touch [Return] to restore the Machine Administrator Setting Menu Screen. If further changes are required, touch the desired key. 6-112 bizhub PRO C6501...
Setting Menu Screen. Touch [04 User Auth./Account Track], [02 User Authentication Set], and then [03 User Counter]. The User Counter List Screen will be displayed. Follow the instruction below to reset the counter. – To reset counter individually: bizhub PRO C6501 6-113...
Page 378
Touch [Clear (Package)] to display the All Reset Counter Confirma- tion popup menu. Touch [Yes] to reset, or touch [No] to cancel. Touch [Return] to restore the User Authentication Setting Menu Screen. If further changes are required, touch the desired key. 6-114 bizhub PRO C6501...
Setting Menu Screen. Touch [04 User Auth./Account Track], [03 Account Track], and then [01 Account Register]. The Registered Section Screen will be displayed. Follow the instructions below for adding, changing and deleting the section management setting. bizhub PRO C6501 6-115...
Page 380
Touch [Name] to display the input screen. Enter the section name and touch [OK]. You may enter twenty letters for the section name. For the details on entering texts in the input screen, see the appen- dix. 6-116 bizhub PRO C6501...
Page 381
Touch [Upper] to display the keypad which can be used to enter the upper limit. Touch [Copy], [Scanner], or [Printer] in the "Useable Function" to specify the functions made available to the account. Touch [OK] to complete the setting. – To add section settings: bizhub PRO C6501 6-117...
Page 382
For the details on entering texts in the input screen, see the appen- dix. Touch [Color] or [Black] in the "Output Permission" to select the type of printing operation made available to the account. Touch [Upper Limit Set] to display the Upper Limit Setting Screen. 6-118 bizhub PRO C6501...
Page 383
To delete registered section settings: Touch [Next] or [Previous] to display the section name to be deleted and touch to highlight it. Touch [Delete] to display the Delete Confirmation popup menu. Touch [Yes] to delete, or touch [No] to cancel. bizhub PRO C6501 6-119...
Page 384
Touch [Upper] to display the keypad which can be used to enter the upper limit. Touch [Copy], [Scanner], or [Printer] in the "Useable Function" to specify the functions made available to all users. Touch [OK] to complete the setting. 6-120 bizhub PRO C6501...
Page 385
Machine Administrator Setting Touch [Return] to restore the Machine Administrator Setting Menu Screen. If further changes are required, touch the desired key. bizhub PRO C6501 6-121...
Setting Menu Screen. Touch [04 User Auth./Account Track], [03 Account Track], and then [02 Account Counter]. The Section Counter List Screen will be displayed. Follow the instruction below to reset the counter. – To reset counter individually: 6-122 bizhub PRO C6501...
Page 387
Touch [Clear (Package)] to display the All Reset Counter Confirma- tion popup menu. Touch [Yes] to reset, or touch [No] to cancel. Touch [Return] to restore the Account Track Setting Menu Screen. If further changes are required, touch the desired key. bizhub PRO C6501 6-123...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [04 User Auth./Account Track], and then [04 Without Authenti- cation]. The Without Authentication Setting Screen will be displayed. Touch [Permission] or [Prohibition] separately under "Print" and the "Pull Scan". 6-124 bizhub PRO C6501...
Page 389
Machine Administrator Setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the User Auth./Account Track Setting Screen will be re- stored. If further changes are required, touch the desired key. bizhub PRO C6501 6-125...
Control the NIC settings such as the IP address and line speed of the ma- chine. Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [05 Network Setting], and then [01 Machine NIC Setting]. The Machine NIC Setting Screen will be displayed. 6-126 bizhub PRO C6501...
Page 391
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Network Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-127...
(Full path, up to 128 characters) – If the Name resolution is not in operation, enter the IP address as usual. – When using the Security Strengthen mode, only the IP address can be entered. 6-128 bizhub PRO C6501...
Page 393
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Network Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-129...
Side 2 Lens Adjustment mode Specify whether to enable the lens adjustment mode. On/Off Tray Change Time When selecting the tray which sets different paper type, specify the time when it becomes the copy possible. Short/Standard 6-130 bizhub PRO C6501...
Page 395
Specify whether or not to allow paper from several printer jobs to pile up in the large capacity stacker LS-505. Permission/Prohibition Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. bizhub PRO C6501 6-131...
Page 396
Machine Administrator Setting Touch [06 Common Setting]. The Common Setting Screen will be displayed. Detail The following operation is equivalent to selecting [User Setting \ 03 Com- mon Setting]. Please refer to page 5-44 for more information. 6-132 bizhub PRO C6501...
Set the machine to detect the size of the original and select the appropriate magnification ratio to correspond to the selected paper size. On/Off ADF AMS Set the machine to automatically select an appropriate ratio for copying when detecting the original size placed on the ADF. On/Off bizhub PRO C6501 6-133...
Page 398
Specify whether to delete the set bookmark or not, or select to disable the bookmark function. Off/Release Every Job/Not release Orig./Out Bind Direction Set Set the machine to conform the binding direction of the originals and printed sets each other. On/Off 6-134 bizhub PRO C6501...
Page 399
Set to stop scanning when pulling out the tray. On/Off Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [07 Copy Setting]. The Copy Setting Screen will be displayed. bizhub PRO C6501 6-135...
Page 400
Machine Administrator Setting Detail The following operation is equivalent to selecting [User Setting \ 04 Copy Setting]. Please refer to page 5-47 for more information. 6-136 bizhub PRO C6501...
Packaged TIFF/Divided TIFF/Packaged PDF/JPEG Default Address Select the default destination to be displayed when selecting the Scanner Screen. E-Mail/HDD/FTP/SMB/QUEUE Compress Method Color/Gray Select the default destination to be displayed when selecting the Scanner Screen. High Compress/Standard/Low Compress bizhub PRO C6501 6-137...
Page 402
Setting Menu Screen. Touch [08 Scan Setting]. The Scan Setting Screen will be displayed. Detail The following operation is equivalent to selecting [User Setting \ 05 Scan Setting]. Please refer to page 5-51 for more information. 6-138 bizhub PRO C6501...
Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [09 System Connection], and then [01 Administrator]. The Administrator Call Screen will be displayed. Touch [Start]. bizhub PRO C6501 6-139...
Page 404
Machine Administrator Setting Touch [Return] to restore the System Connection Menu Screen. If further changes are required, touch the desired key. 6-140 bizhub PRO C6501...
Set the new machine administrator password. Procedure Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [10 Security Setting], and then [01 Administrator Password]. The Administrator Password Input Screen will be displayed. bizhub PRO C6501 6-141...
Page 406
Enter the new password. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Security Setting Menu Screen will be restored. If further changes are required, touch the desired key. 6-142 bizhub PRO C6501...
Touch [10 Security Setting], and then 02 Change HDD Lock Password. The Change HDD Lock Password Menu Screen will be displayed. Touch [Current Password] to display the Password Input Screen. Enter the current password and touch [OK]. bizhub PRO C6501 6-143...
Page 408
Touch [Check Input] to enter the same new password, then touch [OK]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Security Setting Menu Screen will be restored. If further changes are required, touch the desired key. 6-144 bizhub PRO C6501...
Touch [Yes] or [No]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Security Setting Menu Screen will be restored. If further changes are required, touch the desired key. bizhub PRO C6501 6-145...
Follow the procedure on page 6-3 to display the Machine Administra- tor Setting Menu Screen. Touch [10 Security Setting], and then [04 Security Strengthen Set]. The Security Strengthen Setting Screen will be displayed. Touch [On] when activating this mode, or touch [Off] when deactivating this mode. 6-146 bizhub PRO C6501...
Page 411
Touch [Yes] to complete the setting. The machine power will be turned off, then on. – Touch [No] to cancel the setting. Touch [Cancel] at the lower right side of the screen to restore the Machine Administrator Setting Menu Screen. bizhub PRO C6501 6-147...
Page 415
Touch Screen Adjustment Screen only when pressing [4] with the Utility Menu Screen displayed. Contact your service representative for details. Procedure Press the [Utility/Counter] on the control panel. The Utility Menu Screen will be dis- played. bizhub PRO C6501...
Page 416
– If the coordinates fall out of the range of the standard value, repeat the adjustment procedure or contact your service representative. bizhub PRO C6501...
Page 417
Press [0] on the control panel keypad to complete the setting. – To cancel the change, press [1] on the control panel keypad. In either case, the Utility Menu Screen will be restored. bizhub PRO C6501...
Menu) cannot be changed. Enter the administrator password previously specified on the machine. 12345678 is initially applied. Once entered, the user name and password are not necessary to be re- entered unless the web browser is restarted. bizhub PRO C6501...
Page 422
Enter the URL (http:// [IP address or host name of the machine]), then click on [OK]. The Main Page of the Web Utilities will be displayed. Note The Web Utilities window is subject to change without notice. bizhub PRO C6501...
The User Distribute Number is assigned "0". Account Track is set "Manage". User authentication data is not yet registered. 8.2.1 Adding Account Track Procedure Open the Web Utilities window. Click on [Machine Manager Setting]. The Enter Network Password dialogue box will be displayed. bizhub PRO C6501...
Page 424
[OK]. The Machine Manager Setting menu will be displayed. Click on [Volume Track setting]. The Volume Track Setting menu will be displayed. Click on [Volume Track data add]. The Volume Track Data Add window will be displayed. bizhub PRO C6501...
Page 425
Color Up to 99999999 Black Up to 99999999 Only effect Individual Management – Management System: Total Management/ Individual Management – Output Permission: Prohibit Color/ Prohibit Black – Useable Function: Prohibit Copy/ Prohibit Scanner/ Prohibit print Click on [Registration]. bizhub PRO C6501...
Page 426
Note To clear the text boxes, click on [Reset]. To cancel adding a new account track data, click on [Back] or any Ma- chine Manager Setting menu item to jump to the desired window. bizhub PRO C6501...
Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text box, then click on [OK]. The Machine Manager Setting menu will be displayed. Click on [Volume Track setting]. The Volume Track Setting menu will be displayed. bizhub PRO C6501...
Page 428
The Volume Track Data Change window will be displayed. – Change the Section Name (account name), Password, Name, Up- per Limit Setting, Management System, Output Permission, or Use- able Function, as desired. For details in entering procedure, refer to page 8-7. 8-10 bizhub PRO C6501...
Page 429
The edited content will be displayed in the window. The edited data will be transmitted to the machine immediately so that is valid for the user operations. – Click on [Back] to return to the Volume Track Data List window. bizhub PRO C6501 8-11...
Page 430
Click on the radio button (a white circle) heading the "Copy/Printer Count reset." or "Scan Count reset." – Click on [Apply]. The Counter Reset Confirmation window will be displayed. – Click on [Apply] to immediately reset the counters to zero. 8-12 bizhub PRO C6501...
Page 431
If all the data are to be cleared, click on [Select All]. – Click on the radio button (a white circle) heading the "Delete (Ex- cept for Another user count)". – Click on [Apply]. The Delete Confirmation window will be displayed. bizhub PRO C6501 8-13...
Page 432
Click on [Apply] to immediately delete the data. The message "Setting was deleted" will be displayed. – Click on [Back] to return to the Volume Track Data List or any menu item to jump to the desired window. 8-14 bizhub PRO C6501...
Page 433
Web Utilities Setting Save Counter. – Click on [Save this table as a file]. – Click on [Save]. bizhub PRO C6501 8-15...
Page 434
The data cannot be saved while the machine is in operation. In this case, try this procedure again after the machine starts idling. Click on [Back] in the browser window to return to the Account Track Data List for starting over. 8-16 bizhub PRO C6501...
Page 435
Web Utilities Setting Example: Account track data list stored as a file The "Public User" will be stored by the name of "PUBLIC" in the last line. bizhub PRO C6501 8-17...
- The machine should be connected with a PC over a network with TCP/IP enabled. - Set the Security Strengthen mode OFF on the machine. Procedure Open the Web Utilities window. Click on [Machine Manager Setting]. The Enter Network Password dialogue box will be displayed. 8-18 bizhub PRO C6501...
Page 437
Click on [Remote Panel Setting/Job History Setting]. The Remote Panel Setting/Job History Setting menu will be displayed. Make settings for Remote Panel. Specify the IP address of the PC to be used for Remote Panel. Up to 3 addresses can be entered. bizhub PRO C6501 8-19...
Page 438
To complete the entry without making any other setting, proceed to step 8. Make settings for Remote Monitor. Enter the user label for the remote monitor, and select the desired re- fresh interval. To complete the entry without making any other setting, proceed to step 8. 8-20 bizhub PRO C6501...
Page 439
To complete the entry without making any other setting, proceed to step 8. Click on [Registration]. The newly entered data will be registered on the machine immediately. Click on [Administrator Setup Menu] to return to the Machine Manager Setting menu. bizhub PRO C6501 8-21...
- The HDD Box No. will be registered as a 9-digit number. For example, entering [1] will be registered as [000000001]. Procedure Open the Web Utilities window. Click on [Machine Manager Setting]. The Enter Network Password dialogue box will be displayed. 8-22 bizhub PRO C6501...
Page 441
Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text box, then click on [OK]. The Machine Manager Setting menu will be displayed. Click on [Scan transmission setting]. The Scan Transmission Setting window will be displayed. bizhub PRO C6501 8-23...
Page 442
Web Utilities Setting Register the E-Mail, HDD, FTP, and SMB, as required. 8-24 bizhub PRO C6501...
Page 443
Click on [Back] to return to the Scan Transmission Setting window. Display the Entry List. Click on [Entry List] of the desired item under the entry box to display the Entry List. Click on [Back] to return to the Scan Transmission Setting window. bizhub PRO C6501 8-25...
Page 444
The window for changing the selected item will be displayed. Change the contents as desired, then click on [Registration]. The registered content will be displayed. Click on [Back] to return to the Scan Transmission Setting window. 8-26 bizhub PRO C6501...
Page 445
The window for deleting the selected item will be displayed. Confirm the registered name to be deleted, then click on [Yes]. Click on [Back] to return to the Entry List window. Click on [Back] to return to the Scan Transmission Setting window. bizhub PRO C6501 8-27...
(Paper Setting data) ip_email.txt (E-mail data of Scan Transmission Setting data) ip_hdd.txt (HDD data of Scan Transmission Setting data) ip_ftp.txt (FTP data of Scan Transmission Setting data) ip_smb.txt (SMB data of Scan Transmission Setting data) 8-28 bizhub PRO C6501...
Page 447
Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text box, then click on [OK]. The Machine Manager Setting menu will be displayed. Click on [Setting data Import/Export]. The Setting Data Import/Export window will be displayed. bizhub PRO C6501 8-29...
Page 448
Select the desired file type from the pull-down menu, then click on [Ex- port….] The File Download dialogue box will be displayed. Click on [Save]. In the dialogue box, designate the folder for saving the machine setting file, then click on [Save]. 8-30 bizhub PRO C6501...
Page 449
Text Editor or Table Editor. A new setting file can also be created according to the specifications for each file type. See page 8-34 for details. bizhub PRO C6501 8-31...
Page 450
Web Utilities Setting Import the machine setting file. Click on [Browse…] to designate the machine setting file to be import- ed, then click on [Import]. The result message will be displayed when the registration is complet- 8-32 bizhub PRO C6501...
Page 451
- A line should be 300 bytes or less. - The file size should be 100,000 bytes or less. - The line that begins with "#" is a comment. ex. Machine setting file of an account track data bizhub PRO C6501 8-33...
Page 452
- A line should include NAME, ADDRESS, FILEPATH, LOGINNAME, PASSWORD, REFERENCE, or DAILY being separated by a tab. - NAME should be 24 bytes or less. - ADDRESS should be 63 bytes or less. - FILEPATH should be 96 bytes or less. 8-34 bizhub PRO C6501...
Page 453
- LOGINNAME should be 47 bytes or less. - PASSWORD should be 14 bytes or less. - REFERENCE should be 24 bytes or less. - Mark DAILY USE with "1" or DAILY NOT USE with "0" in each column. bizhub PRO C6501 8-35...
The Enter Network Password dialog box will be displayed. Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text box, then click on [OK]. The Machine Manager Setting menu will be displayed. 8-36 bizhub PRO C6501...
Page 455
100,000/500,000/1,000,000 to specify the maximum number of jobs to be stored on HDD. To turn off this function, select "0". Please be aware that changing the maximum number of jobs may reset the job history data. bizhub PRO C6501 8-37...
The Enter Network Password dialog box will be displayed. Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text box, then click on [OK]. The Machine Manager Setting menu will be displayed. 8-38 bizhub PRO C6501...
Page 457
[Job History List]: Displays last 100 jobs. [Previous]: Scrolls to the previous 100 jobs. [Next]: Scrolls to the next 100 jobs. The items provided in the job history list can be changed. For details, contact your service representative. bizhub PRO C6501 8-39...
This key determines the characters you input, and the character input screen closes. [Cancel] This key cancels the characters you input, and the character input screen closes. [Shift] This key switches between an upper case letter and a lower case letter, and between numbers and signs. bizhub PRO C6501...
Page 462
The followings describe basic steps to input characters on the character input screen. Touch the corresponding key to input the desired character. Touch [OK]. The character input screen closes. The input characters are displayed on the corresponding column. bizhub PRO C6501...