Konica Minolta bizhub pro c500 User Manual page 43

FS-513 Finisher
11 Cartridge housing
1 Entrance lever opens downward to remove mishandled paper.
2 PK-507/PK-508 Punching kit (option) punches file holes in the output copies.
3 Cover sheet conveyance lever opens to remove mishandled paper.
4 Sub tray conveyance lever opens to remove mishandled paper.
5 Stacker conveyance lever opens to remove mishandled paper.
6 Lower lever opens to remove mishandled paper.
7 Stacker unit knob can be turned to ease removal of mishandled paper from
the Stacker unit.
8 Stacker unit folds or stitches & folds copies into booklet-styled sets, and also
folds max. 3 copies in three.
9 Waste basket (option) holds waste paper punched out.
10 Stacker unit handle withdraws unit to allow removal of mishandled paper and
replacement of staple cartridge.
11 Cartridge housing holds staple cartridge to be replaced when supplying
staples.
4 Sub tray
conveyance lever
3 Cover sheet
conveyance
lever
1 Entrance lever
5 Stacker
conveyance
lever
10 Stacker unit handle
Machine Configuration (continued)
FS-606 Finisher with
PK-507/PK-508 Punching kit
4 Sub tray
conveyance lever
3 Cover sheet
conveyance
lever
2 PK-507/PK-508
Punching kit
(option)
1 Entrance lever
9 Trash basket
(option)
8 Stacker unit
7 Stacker unit
knob
6 Lower lever
2-11