Display; Function - Konica Minolta Di1610 Service Manual

(4)

Display

• Various information can be displayed.

Function

MAIN F/W VER. To display the version of the main firmware.
ENGINE F/W VER. To display the version of the engine firmware.
MAIN RAM SIZE To display the size of the main memory.
SERIAL NO. To display the serial number of the main unit.
CUSTOMER ID To display the customer ID for the main unit.
To display the type of Toner Cartridge that should be installed in the
TC TYPE
main unit.
(5) Function
• The service functions (paper feed test and image printing) can be checked and adjusted.
Function
To check the paper feeding in the
paper take-up/transport sections
without printing on the paper.
PAPER FEED TEST
✽ When a paper misfeed occurs
To print the test pattern for adjust-
ing the image.
TEST
PAT-
✽ If there is tilt or when registration
TERN 1
PRINT
TEST
To print the test pattern for half-
PAT-
tones and gradations.
TERN
TEST
✽ When checking density and
PAT-
TERN 2
✽ When checking reproducibility of
To check the paper feeding in the
paper take-up/transport sections in
the Automatic Document Feeder.
ADF FEED TEST
✽ When a document misfeed
Purpose
Purpose
or zoom ratio adjustments are
performed
pitch irregularities
gradations
occurs
S-19
Setting Details/Precautions
Setting Details/Precautions
<Procedure>
1. Select the paper tray.
2. Press the Start key to begin
testing paper feeding.
3. Press the Stop key to stop
testing paper feeding.
<Procedure>
1. Select the paper tray.
2. Select the test pattern type.
3. Press the Start key to print
the test pattern.
<Procedure>
1. Select the paper tray.
2. Select the test pattern type.
3. Press the Start key to print
the test pattern.
<Procedure>
1. Load paper into the Auto-
matic Document Feeder.
2. Press the Start key to begin
testing paper feeding.
3. Press the Stop key to stop
testing paper feeding.