Status Light Indicator; Meridian Sl-100 Configuration Procedures - Nortel m3900 series User Manual

During a call, you can remove or insert the FDHF cartridge into the ACM
without interrupting the established call. If you remove the FDHF cartridge,
the set returns to half-duplex operation.

Status light indicator

A red LED status light on the FDHF cartridge indicates the status of the
cartridge as follows:
•
•
•
Meridian SL-100 configuration procedures
Table 23 "Add a new M3904 set with handsfree enabled in SERVORD"
(page 103)
SERVORD" (page 103)
use to configure the Meridian SL-100 FDHF on new and existing M3904
sets.
Table 23
Add a new M3904 set with handsfree enabled in SERVORD
Prompt
SO:
...
HANDS_FREE
Table 24
Enable handsfree on an existing M3904 set in SERVORD
Prompt
SO:
...
OPTKEY
OPTION:
HANDS_FREE:
The M3904 must be NTMN34GA or later vintage. If you are replacing
an existing M3904 that has handsfree enabled, you do not require a
SERVORD change.
Copyright © 2008 Nortel Networks
.
Full Duplex Handsfree (FDHF) Accessory on the M3904 103
Flashing red - the cartridge is operating normally.
Solid red - the cartridge is not operating normally. Contact your
network administrator.
Red light off - there is no power going to the cartridge or the cartridge
is not operating correctly. Check the power connection to the cartridge.
If the condition continues, contact your network administrator.
and Table 24 "Enable handsfree on an existing M3904 set in
Response
new
y
Response
Chf
1
hndsfree
y
Nortel Communication Server 2100
M3900 Series Meridian Digital Telephones User Guide
NN42200-110 09.01 Standard
20 August 2008
show examples of the SERVORD commands you
Description
Enter new if the telephone is not currently
configured.
Enter "y" for yes.
Description
Change feature on existing M3904 set.
Enter the primary DN key #.
Enter "hndsfree" for Handsfree operation.
Enter "y" for yes.