Nortel m3900 series User Manual page 61

Table 14
M3905 keys (cont'd.)
Key
Goodbye key
Hold key
Copyright © 2008 Nortel Networks
.
Description
•
Ring Type - select a ring type from a list of available tones.
•
Call Log Options - log all answered and unanswered calls or
only unanswered calls in the callers list.
•
Live Dial Pad - allows you to press any dial pad key to
automatically access a dial tone.
•
Preferred Name Match - displays the names of incoming and
outgoing callers as stored in your Personal Directory, if the
telephone number matches the one stored in your directory.
This option allows you to personalize the displayed names for
incoming and outgoing calls.
•
Area Code Set Up - enables the Callers List and Calling Line
ID (CLID) display to show the number/extension followed by the
area code/prefix in parenthesis. This makes it easier to identify
local calls and internal calls. You can define up to three codes.
•
Call Timer Enable - automatically time all calls and display the
time for 10 seconds after the call disconnects.
•
Date/Time Format - select the time and date format to display
when the phone is idle.
•
Key Click Enable - provides audible feedback when using the
dial pad (no feedback is given when the option is off).
•
Headset Type - open the voice path automatically to headset
or handsfree.
•
Headset Port On Call - enable or disable the call in progress
indication feature. This feature requires a lamp-type accessory
to be connected to the headset port of the terminal, which is
signaled by the terminal while a call is in progress. The terminal
turns on the accessory lamp while calls are in progress, and
turns the lamp off once the call is terminated.
•
Headset Port External Alerter - supports a visual or audible
alerter and/or recorder device. This device plugs into the
Headset port, which is located on the bottom of the telephone.
•
Display Diagnostics - provides a display self diagnostic test.
You cannot assign the Options key to a DN or feature key.
Use the Goodbye key to terminate an active call.
A user can place an active call on hold by pressing the Hold key.
The feature key label of the held line displays an icon that shows
that the call is on hold. A user can return to the call that is on hold
by pressing the Line key for which the call is on hold.
Nortel Communication Server 2100
M3900 Series Meridian Digital Telephones User Guide
NN42200-110 09.01 Standard
20 August 2008
Keys 61