Nortel m3900 series User Manual page 47

Table 10
M3903 keys (cont'd.)
Key Description
Goodbye key The Goodbye key terminates an active call.
Hold key Press the Hold key to place an active call on hold. An icon displays that
indicates the call is on hold. Press the Line key to return to the call on hold.
Handsfree/ Press the Handsfree key to use the speaker (with built-in microphone), instead
Group Listen of the handset/headset. The handsfree indicator lights when the mode is
key and on. Take the handset off-hook or use options mode to switch back to the
indicator handset/headset at any time during the call. Refer to Nortel Communication
Server 2100 Service Order Reference — Commercial Systems, NN42100-103
for Group Listen functionality.
Mute key and Press the Mute key to mute the call. The microphone is muted in handsfree
indicator mode and the indicator flashes. Press the key a second time to talk.
Prime DN key Take the handset off-hook or press the DN key to access the DN. Press the
DN key for on-hook dialing or to take a call off hold. This is a self-labeled key
that displays the DN assigned to key 1. This key is also key 3 used for DNs
and features. Press the shift key to access key 3. The prime DN key can only
be used as a DN key.
Second Line/ You can use this key as a second DN or as feature key 2. This is a
Feature key self-labeled key that displays the DN or feature assigned to the key. This key
is also key 4 for DNs and features. Press the shift key to access key 4.
Headset with Activate this key for headset use. The LED lights when the set is in headset
LED key mode.
Message key This is a fixed feature key that corresponds to feature/option key 17. You must
program this key using SERVORD. Although it is permanently labeled as
Message, it does not have to be datafilled as such. In order to access voice
mail without a message waiting, Nortel recommends assigning Message to
key 1 and Autodial to the Message key (key 17.) The Autodial key should be
programmed with the voice mail system DN.
Quit key Use the Quit key for applications and features.
Call Log key
Use the Call Log key to look at the call log and Redial List using the navigation
keys. With M3900 Release 3 firmware and MSL15 software, you can
assign the Call Log and Redial as a context-sensitive key or programmable
line/feature key. There are 10 call log entries and five outgoing entries through
the Redial List.
AUTODISP (autodisplay) should be assigned to M3900 sets with the Call
Logging capability (that is, the M3903, M3904, M3905) to ensure logging of
incoming and outgoing calls.
Application key Use this key to connect to applications located on a remote server and to
access the Corporate Directory Application.
Shift key Use the Shift key to navigate between the two layers of line/feature keys.
Copyright © 2008 Nortel Networks
.
Nortel Communication Server 2100
M3900 Series Meridian Digital Telephones User Guide
NN42200-110 09.01 Standard
20 August 2008
Keys 47