Interactions; Data Schema; Password Reset - Nortel m3900 series User Manual

The GLISTEN feature is only available when enabled, and when assigned
to the set through SERVORD. When this feature is not available, it does
not show up in the options menu lists. In addition, because handsfree
and group listening cannot be in activation at the same time, the group
listening enable feature is not in the options list if there is an active call
with handsfree enabled.
In order to use the GLISTEN feature, the user must first enable the feature
by using the Options mode. When the feature is enabled, the handsfree
key can turn the speaker on or off. To turn off the speaker, the user must
press the Handsfree key a second time. The speaker only turns on if the
handset is off-hook. The speaker automatically turns off when the handset
is placed on-hook.
To activate handsfree when group listening is in use, the user must press
and hold the Handsfree key, place the handset on-hook, and release the
handsfree key. Alternately, the user can place the call on hold by pressing
the Hold key, place the handset on-hook, followed by pressing the DN key
that has the held call.
You must enable handsfree for group listening to be enabled.

Interactions

GLISTEN is assignable to M3902, M3903, and M3904 sets using
SERVORD commands NEW, NEWACD, ADD, and EST. Use the
SERVORD CHF command to toggle the status of the option to an existing
set previously listed. When you provision the options through SERVORD,
the user can access the GLISTEN feature with the options key.

Data schema

Table IVDINV has set refinements added with GLISTEN as a boolean field.
Refer to Nortel Communication Server 2100 Configuration — Commercial
Systems Data Schema Reference, NN42100-504 for more information.

Password reset

The M3903, M3904, and M3905 sets provide password reset capability to
directories that can be password protected.
The M3903 set uses password reset for the call log/redial fixed feature
key. The call log/redial key allows access to the call log and the Redial
List.
The M3904 set uses password reset for the directory/log fixed feature key.
The directory/log key allows access to set-based applications, such as
personal directory, call log, and Redial List.
Copyright © 2008 Nortel Networks
.
Nortel Communication Server 2100
M3900 Series Meridian Digital Telephones User Guide
NN42200-110 09.01 Standard
20 August 2008
Password reset 19