Password Clear - Nortel m3900 series User Manual

16 M3900 series general description
3
Corporate Directory
If there is a call on a primary DN, or the set is configured as an ACD
Call Center telephone, use the following procedures to dial out on the
secondary DN.
Procedure 4
Dial out on secondary DNs using Corporate Directory - M3903 and M3904
Step
1
2
Procedure 5
Dial out on secondary DNs using Corporate Directory - M3905
Step
1
2

Password clear

Administrators can clear and reset the Directory/Call Log password. Turn
off the password by using Password Clear.
Copyright © 2008 Nortel Networks
.
The M3905 displays "Select Free Line". Your site must be on MSL15
(or higher) and the patch ID DMX12 applied.
Press a secondary DN key, press "OK", and press the dial soft
key again.
The M3905 dials the number.
If your site is not yet on MSL15, the M3905 will not display the
message; however, you use the same steps to dial the number.
Action
Press the Applications Key, select Corporate Directory, and
select the entry.
Press the secondary DN key and then press the dial soft key.
The M3903/M3904 dials the number.
If you press the dial soft key prior to pressing the secondary DN
key, the set will not dial the call, and it will cancel hold for the call
that is on the primary DN.
Action
Press the Applications key, select Corporate Directory and
select the entry.
Press the dial soft key, then press a secondary DN key.
The M3905 dials the call.
Nortel Communication Server 2100
M3900 Series Meridian Digital Telephones User Guide
NN42200-110 09.01 Standard
20 August 2008
--End--
--End--
--End--