Telnet Command: Wan Vlan - Draytek VIGOR2925 SERIES User Manual

E x a m p l e
E x a m p l e
> wan multifno 5 1
% Configured channel 5 uplink to WAN1
> wan multifno status
% Channel 3 uplink ifno: 3
% Channel 4 uplink ifno: 3
% Channel 5 uplink ifno: 3
% Channel 6 uplink ifno: 3
% Channel 7 uplink ifno: 3
>
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows you to tag packets on WAN VLAN with specified number.
wan vlan wan [#] tag [value]
wan vlan wan [#] [enable|disable]
wan vlan stat
S y n t a x D e
S y n t a x D e
Parameter
#
value
enable|disable
stat
E x a m p l e
E x a m p l e
> wan vlan stat
%Interface
%======================================
%WAN1
%WAN2
> wan vlan wan 1 tag 3
% Set tag to 3 for WAN1
> wan vlan wan 1 tag 50
%Set tag to 50 for WAN1
> wan vlan wan 2 tag 60
%Set tag to 60 for WAN2
> wan vlan wan 1 enable
%Enabled VLAN header encap for WAN1
> wan vlan wan 2 enable
%Enabled VLAN header encap for WAN2
> wan vlan stat
: w a n v l a n
: w a n v l a n
s c r i p t i o n
s c r i p t i o n
Description
It means the number of WAN interface.
1: means WAN1
2: means WAN2.
It means the number to be tagged on packets.
The range of the value is between 32 ~ 4095.
It means to enable or disable the WAN interface for VLAN.
It means to display the table of WAN VLAN status.
Pri Tag
0 0
0 0
Enabled
725
Vigor2925 Series User's Guide