Draytek VIGOR2925 SERIES User Manual page 240

D e t a i l s
D e t a i l s
There are two configuration pages for LAN1/LAN2/LAN3/LAN4/LAN5/LAN6/DMZ Port,
Ethernet TCP/IP and DHCP Setup (based on IPv4) and IPv6 Setup. Click the tab for each type
and refer to the following explanations for detailed information. Below shows the settings
page for IPv6.
It provides 2 daemons for LAN side IPv6 address configuration. One is SLAAC(stateless) and
the other is DHCPv6 (Stateful) server.
Available settings are explained as follows:
Item
Enable
WAN Primary Interface
Static IPv6 Address
Vigor2925 Series User's Guide
P a g e f o r L A N I P v 6
P a g e f o r L A N I P v 6
Description
Check the box to enable the configuration of LAN 1 IPv6
Setup.
Use the drop down list to specify a WAN interface for IPv6.
IPv6 Address –Type static IPv6 address for LAN.
Prefix Length – Type the fixed value for prefix length.
S e t u p
S e t u p
224