Draytek VIGOR2925 SERIES User Manual page 459

Below shows the detected APs by clicking OK.
Available settings are explained as follows:
Item
Enable
Refresh Min(s)
Refresh
Ch
Description
Neighbor AP Detection – The access point(s) registered to
Vigor2925 will be used to detect other access points and send
the scanned results to Vigor2925. Later, the scanned result will
be displayed on this page.
Local WLAN Detection – The router will detect all the access
points through wireless LAN connection.
Specify the access points which are classified under each type.
Use the drop down list to specify the time to refresh the web
page.
Click such link to refresh the web page immediately.
Display the channel used by the detected access point.
443
Vigor2925 Series User's Guide