Draytek VIGOR2925 SERIES User Manual page 208

After finishing all the settings here, please click OK to activate them.
D e t a i l s
D e t a i l s
When Offline is selected, the IPv6 connection will be disabled.
D e t a i l s
D e t a i l s
During the procedure of IPv4 PPPoE connection, we can get the IPv6 Link Local Address
between the gateway and Vigor router through IPv6CP. Later, use DHCPv6 or accept RA to
acquire the IPv6 prefix address (such as: 2001:B010:7300:200::/64) offered by the ISP. In
addition, PCs under LAN also can have the public IPv6 address for Internet access by means
of the generated prefix.
No need to type any other information for PPP mode.
Available settings are explained as follows:
Item
WAN Connection
Detection
Vigor2925 Series User's Guide
P a g e f o r I P v 6 – O f
P a g e f o r I P v 6 – O
P a g e f o r I P v 6 – P P
P a g e f o r I P v 6 – P P
Description
Such function allows you to verify whether network
connection is alive or not through NS Detect or Ping Detect.
Mode – Choose Ping Detect or Always On for the system to
execute for WAN detection.
allowed to execute the PING operation before WAN
disconnection is judged.
f l i n e i n W A N 1 / W A
f f l i n e i n W A N 1 / W A
P i n W A N 1 / W A N 2
P i n W A N 1 / W A N
192
N 2 / W A N 3 / W A N 4
N 2 / W A N 3 / W A N 4
2