Wan Status - Draytek Vigor2100V User Manual

2.2.3 WAN Status

Mode Indicate which broadband access mode is active.
Depending upon the access mode, you may see PPPoE,
PPTP, PPPoA, or Static IP or DHCP.
GW IP Addr The gateway IP address.
IP Address IP address of the WAN interface.
TX Packets Total number of transmitted IP packets during this
connection session.
TX Rate Transmission rate in characters per second (cps) for
outgoing data.
Total number of received IP packets during this connection
RX Packets
session.
RX Rate Reception rate in characters per second (cps) for incoming
data.
Up Time Connection time. The format is HH:MM:SS, where HH,
MM, and SS, indicate hours, minutes, and seconds,
respectively.
Click the link to dial/or disconnect the PPPoE or PPTP
Drop/Dial
connection.
PPPoE or
PPTP
Online Status
2-3