Telnet Command: Wl Stamgt - Draytek VIGOR2925 SERIES User Manual

T e l n e t C o m m
T e l n e t C o m m
This command is used to configure connection time and reconnection time for each SSID that
wireless client used for accessing into Internet.
wl stamgt [enable/disable] [ssid_num]
wl stamgt [show] [ssid_num]
wl stamgt set [ssid_num] [c] [r]
wl stamgt reset [ssid_num]
S y n t a x
S y n t a x
Parameter
enable/disable
ssid_num
show
c
r
E x a m p
E x a m p
> wl stamgt enable 1
% Station Management Status: enabled
> wl stamgt set 1 60 60
> wl stamgt show 1
NO. SSID
1. Draytek
Vigor2925 Series User's Guide
a n d : w l s t a m g t
a n d : w l s t a m g t
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to enable/disable the station management control.
It means channel selection.
Available channel for 2.4G: 0/1/2/3
Available channel for 5G: 4/5/6/7.
It means to display status or configuration of the selected
channel.
It means connection time. The unit is minute.
It means reconnection time. The unit is minute.
l e
l e
BSSID
00:11:22:aa:bb:cc
Connect time Reconnect time
0d:0:58:26
734
0d:0:0