Draytek VIGOR2925 SERIES User Manual page 499

Hide thumbs Also See for VIGOR2925 SERIES:

Table of Contents

Rate Control

5 GHz in "ac" model:

Note: For the restricted channels on DFS, please refer

to 4.18.1 Basic Concepts for more detailed information.

Check it to prevent from wireless sniffing and make it

harder for unauthorized clients or STAs to join your

wireless LAN. Depending on the wireless utility, the user

may only see the information except SSID or just cannot

see any thing about Vigor wireless router while site

surveying. The system allows you to set four sets of SSID

for different usage. In default, the first set of SSID will be

enabled. You can hide it for your necessity.

Means the identification of the wireless LAN. SSID can be

any text numbers or various special characters.

VPN – Check this box to make the wireless clients

(stations) with different VPN not accessing for each other.

Member –Check this box to make the wireless clients

(stations) with the same SSID not accessing for each other.

It controls the data transmission rate through wireless

Upload – Check Enable and type the transmitting rate for

data upload. Default value is 30,000 kbps.

Download – Type the transmitting rate for data download.

Default value is 30,000 kbps.

Set the wireless LAN to work at certain time interval only.

You may choose up to 4 schedules out of the 15 schedules

pre-defined in Applications >> Schedule setup. The

default setting of this field is blank and the function will

always work.

Vigor2925 Series User's Guide