Draytek VIGOR2925 SERIES User Manual page 77

Method
User Name
Password
Remote Network IP
Remote Network
Mask
3. After finishing the configuration, please click Next. The confirmation page will be shown
as follows. If there is no problem, you can click one of the radio buttons listed on the page
and click Finish to execute the next action.
Available settings are explained as follows:
Item
Go to the VPN
Connection
Management
Do another VPN
Server Wizard Setup
authenticated, but not be encrypted. By default, this option
is active.
High - Encapsulating Security Payload (ESP) means
payload (data) will be encrypted and authenticated. You
may select encryption algorithm from Data Encryption
Standard (DES), Triple DES (3DES), and AES.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPsec policy above.
The length of the user name is limited to 11 characters.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPsec policy above.
The length of the password is limited to 11 characters.
Please type one LAN IP address (according to the real
location of the remote host) for building VPN connection.
Please type the network mask (according to the real location
of the remote host) for building VPN connection.
Description
Click this radio button to access VPN and Remote
Access>>Connection Management for viewing VPN
Connection status.
Click this radio button to set another profile of VPN Server
through VPN Server Wizard.
61
Vigor2925 Series User's Guide