Draytek VIGOR2925 SERIES User Manual page 441

4 . 1 4 . 1 . 1 G e n e r a l S
4 . 1 4 . 1 . 1 G e n e r a l S
To enable the CVM feature, the first thing you have to do is enabling CVM port or CVM SSL
Port.
Available settings are explained as follows:
Item
CVM SSL Port
CVM Port
WAN IP for Remote
Connection
Username
Password
Polling Interval
After finishing all the settings here, please click OK to save the configuration.
e t t i n g s
e t t i n g s
Description
Check the box to enable the port setting.
Type the port number in the box.
Check the box to enable the port setting.
Type the port number in the box.
For Vigor router can manage only the client from WAN
interface, therefore you have to specify which interface will be
used for such function. If you choose MANUALLY, you have
to specify WAN IP address.
Type a username which will be used by any CPE trying to
connect to Vigor router.
Type the password for the user.
Type the time value (unit is second). The range is from 60 ~
86400.
425
Vigor2925 Series User's Guide