Telnet Command: Appqos - Draytek VIGOR2925 SERIES User Manual

-H [0/1]
-A [0/1]
User account
USER_NAME
-t
-d
-q
-r
-w
E x a m p
E x a m p
> user account admin -d 1
Enable the [admin] data quota limited
> user edit 1 -v
User Profile [1]
enable status : [enable]
Username : [admin]
Idle Times : [0] mins
Max User Login : [0]
External Server Auth : [None]
[Disable] Time quota : [0] mins
[Disable] Data quota : [1000] MB
Firewall Policy : Set[1]-Rule[0]
Index(1-15) in Schedule Setup: 0, 0, 0, 0
Internal RADIUS user : [Disable]
phase1 support method: [None]
phase2 support method: [None]
Local 802.1X user : [Disable]
phase1 support method: [None]
phase2 support method: [None]
T e l n e t C o m m
T e l n e t C o m m
The command is used to configure QoS for APP.
appqos view
appqos enable[0/1]
appqos traceable [-v | -e AP_INDEX CLASS | -d AP_INDEX]
Vigor2925 Series User's Guide
0:Disable
1:Enable
Enable or disable to set the authentication by web page.
0:Disable
1:Enable
Enable or disable to set the authentication by alert tool.
0:Disable
1:Enable
It means to type a name of the user account.
It means to enable /disable time quota limitation for user
account.
0:Disable
1:Enable
It means to enable /disable data quota limitation for user
account.
0:Disable
1:Enable
It means to set account time quota.
e.g., -q 200
It means to set account data quota.
e.g., -r 1000
It means to set data quota unit (MB/GB).
l e
l e
a n d : a p p q o s
a n d : a p p q o s
752