Telnet Command: Object Service Obj - Draytek VIGOR2925 SERIES User Manual

T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command is used to create service object profile.
object service obj setdefault
object service obj INDEX -v
object service obj INDEX -n NAME
object service obj INDEX -p PROTOCOL
object service obj INDEX -s CHK [START_P] [END_P]
object service obj INDEX -d CHK [START_P] [END_P]
S S y y n n t t a a x x D D e e
Parameter
setdefault
INDEX
-v
-n NAME
CHK
-s CHK [START_P]
[END_P]
-d CHK [START_P]
[END_P]
E x a m p l e
E x a m p l e
: o b j e c t s e r v i c e
: o b j e c t s e r v i c e
s s c c r r i i p p t t i i o o n n
Description
It means to return to default settings for all profiles.
It means the index number of the specified service object
profile.
It means to view the information of the specified service
object profile.
Example:
It means to define a name for the IP object.
NAME: Type a name with less than 15 characters.
Example:
It means the check action for the port setting.
0=equal(=), when the starting port and ending port values are
the same, it indicates one port; when the starting port and
ending port values are different, it indicates a range for the
port and available for this service type.
1=not equal(!=), when the starting port and ending port
values are the same, it indicates all the ports except the port
defined here; when the starting port and ending port values
are different, it indicates that all the ports except the range
defined here are available for this service type.
2=larger(>), the port number greater than this value is
available..
3=less(<), the port number less than this value is available for
this profile.
It means to set souce port check and configure port range
(1~65565) for TCP/UDP.
END_P, type a port number to indicate source port.
Example:
It means to set destination port check and configure port
range (1~65565) for TCP/UDP.
END_P, type a port number to indicate destination port.
Example:
o b j
o b j
object service obj 1 -v
object service obj 9 -n bruce
object service obj 3 -s 0 100 200
object service obj 3 -d 1 100 200
653
Vigor2925 Series User's Guide