Telnet Command: Wl Wds - Draytek VIGOR2925 SERIES User Manual

T e l n e t C o m m
T e l n e t C o m m
This command allows you to configure WDS settings.
wl wds mode [value]
wl wds security [value]
wl wds ap [value]
wl wds hello [value]
wl wds status
wl wds show
wl wds mac [value]
wl wds flush
S y n t a x
S y n t a x
Parameter
mode [value]
security [value]
ap [value]
hello [value]
status
Vigor2925 Series User's Guide
a n d : w l w d s
a n d : w l w d s
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to specify connection mode for WDS.
[value]: Available settings are :
It means to configure security mode with encrypted keys for
WDS.
mode: Available settings are:
key: Moreover, you have to add keys for wpapsk, wpa2psk,
and wep, and specify index number of schedule profiles to be
followed by the wireless connection.
WEP keys must be in 5/13 ASCII text string or 10/26
Hexadecimal digit format; WPA keys must be in 8~63 ASCII
text string or 64 Hexadecimal digit format.
e.g.,
It means to enable or disable the AP function.
Value:
It means to send hello message to remote end (peer).
Value:
It means to display WDS link status for 5GHz connection.
d: Disable
b: Bridge
r: Repeapter
disable:
wep:
wpapsk [key]:
wpa2psk [key]:
wl dual wds security disable
wl dual wds security wep 12345
wl dual wds security wpa2psk 12345678
1 – enable the function.
0 – disable the function.
1 – enable the function.
0 – disable the function.
738
No security.
WEP
WPA/PSK
WPA2/PSK