Led Indicators And Connectors; For Vigor2925 / Vigor2925F/ Vigor2925L - Draytek VIGOR2925 SERIES User Manual

1 . 3 L E D I n d i c
1 . 3 L E D I n d i c
Before you use the Vigor router, please get acquainted with the LED indicators and connectors
first.
1 . 3 . 1 F o r V i g o
1 . 3 . 1 F o r V i g o
LED
ACT (Activity)
WAN1~WAN2
QoS
USB1~USB2/
USB
LTE
WCF
VPN
DMZ
LED on Connector
WAN1~
a t o r s a n d C o n
a t o r s a n d C o n
r 2 9 2 5 / V i g o r 2 9 2
r 2 9 2 5 / V i g o r 2 9 2
Status
Blinking
Off
On
Off
Blinking
On
On
Blinking
On
Off
Blinking
On
On
Off
Blinking
On
Off
Blinking
Left On
LED
Off
n e c t o r s
n e c t o r s
5 F / V i g o r 2 9 2 5 L
5 F / V i g o r 2 9 2 5 L
Explanation
The router is powered on and running normally.
The router is powered off.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
The QoS function is active.
USB device is connected and ready for use.
The data is transmitting.
SIM card is connected and running normally.
LTE device is not detected or encounters troubles (e.g.,
No SIM, SIM PIN error, SIM deactivated)
Quickly: The data is transmitting.
Slowly: LTE device is in dialing up procedure.
The Web Content Filter is active. (It is enabled from
Firewall >> General Setup).
The VPN tunnel is active.
VPN service is disabled.
Traffic is passing through VPN tunnel.
The DMZ function is enabled.
The DMZ function is disabled.
The data is transmitting.
The port is connected.
The port is disconnected.
3
Vigor2925 Series User's Guide