Telnet Command: Object Ipv6 Grp - Draytek VIGOR2925 SERIES User Manual

-a TYPE
[START_IP]
[END/MASK_IP]
E x a m p l e
E x a m p l e
> object ip obj 1 -n marketing
> object ip obj 1 -a 1 192.168.1.45
> object ip obj 1 -v
IP Object Profile 1
Name :[marketing]
Interface:[Any]
Address type:[single]
Start ip address:[192.168.1.45]
End/Mask ip address:[0.0.0.0]
Invert Selection:[0]
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command is used to integrate several IP objects under an IP group profile.
object ip grp setdefault
object ip grp INDEX -v
object ip grp INDEX -n NAME
object ip grp INDEX -i INTERFACE
object ip grp INDEX -a IP_OBJ_INDEX
S y n t a x D e
S y n t a x D e
Parameter
setdefault
INDEX
-v
-n NAME
It means to set the address type and IP for the IP object
profile.
TYPE=0, means Mask
TYPE=1, means Single
TYPE=2, means Any
TYPE=3, means Rang
Example:
When the TYPE is set with 2, you have to type an IP address
as a starting point and another IP address as end point.
Type an IP address.
Type an IP address (different with START_IP) as the end IP
address.
: o b j e c t i p v 6 g r p
: o b j e c t i p v 6 g r p
s c r i p t i o n
s c r i p t i o n
Description
It means to return to default settings for all profiles.
It means the index number of the specified group profile.
It means to view the information of the specified group
profile.
Example:
It means to define a name for the IP group.
NAME: Type a name with less than 15 characters.
Example:
object ip obj 3 -a 2
object ip grp 1 -v
object ip grp 8 -n bruce
651
Vigor2925 Series User's Guide