Draytek VIGOR2925 SERIES User Manual page 193

D e t a i l s P a g e f o r P
D e t a i l s P a g e f o r P
To use PPPoE as the accessing protocol of the internet, please click the PPPoE tab. The
following web page will be shown.
Available settings are explained as follows:
Item
Enable/Disable
ISP Access Setup
WAN Connection
P P o E i n W A N 1 / W A
P P o E i n W A N 1 / W
Description
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
Service Name (Optional) - Enter the description of the
specific network service.
Username – Type in the username provided by ISP in this
field.
The maximum length of the user name you can set is 63
characters.
Password – Type in the password provided by ISP in this
field.
The maximum length of the password you can set is 62
characters.
Index (1-15) in Schedule Setup - You can type in four sets
of time schedule for your request. All the schedules can be
set previously in Application >> Schedule web page and
you can use the number that you have set in that web page.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
177
N 2
A N 2
Vigor2925 Series User's Guide