Draytek VIGOR2925 SERIES User Manual page 309

Confirm Password
Idle Timeout
Max User Login
Policy
External Service
Authentication
Type the password again for confirmation.
If the user is idle over the limitation of the timer, the network
connection will be stopped for such user. By default, the Idle
Timeout is set to 10 minutes.
Such profile can be used by many users. You can set the
limitation for the number of users accessing Internet with the
conditions of such profile. The default setting is 0 which means
no limitation in the number of users.
It is available only when User-Based mode selected in User
Management>>General Setup.
Default – If you choose such item, the filter rules pre-configured
in Firewall can be adopted for such user profile.
Create New Policy – If you choose such item, the following
page will be popped up for you to define another filter rule as a
new policy.
For the detailed configuration, simply refer to Firewall>>Filter
Rule. The firewall filter rules that are not selected in
Firewall>>General>>Default rule can be available for use in
User Management>>User Profile.
The router will authenticate the dial-in user by itself or by
external service such as LDAP server or Radius server or
TACACS+ server. If LDAP, Radius or TACACS+ is selected
here, it is not necessary to configure the password setting above.
Note: If LDAP/Radius/TACACS+ is selected as External
Server Authentication, the internal service offered by
RADIUS/Local 802.1X will be invalid immediately. If None is
selected, the internal service will be available again. That is, a
user will be authenticated by either external server or internal
server.
293
Vigor2925 Series User's Guide