Remote Access Control; Ppp General Setup - Draytek VIGOR2925 SERIES User Manual

4 . 1 2 . 1 R e m o t
4 . 1 2 . 1 R e m o t
Enable the necessary VPN service as you need. If you intend to run a VPN server inside your
LAN, you should disable the VPN service of Vigor Router to allow VPN tunnel pass through,
as well as the appropriate NAT settings, such as DMZ or open port.
After finishing all the settings here, please click OK to save the configuration.
4 . 1 2 . 2 P P P G
4 . 1 2 . 2 P P P G
This submenu only applies to PPP-related VPN connections, such as PPTP, L2TP, L2TP over
IPSec.
Available settings are explained as follows:
Item
Dial-In PPP
Authentication
Vigor2925 Series User's Guide
e A c c e s s C o n t r o
e A c c e s s C o n t r o
e n e r a l S e t u p
e n e r a l S e t u p
l
l
Description
PAP Only - elect this option to force the router to
authenticate dial-in users with the PAP protocol.
PAP/CHAP/MS-CHAP/MS-CHAPv2 - Selecting this
option means the router will attempt to authenticate dial-in
users with the CHAP protocol first. If the dial-in user does
386