Led Indicators And Connectors - Draytek VigorIPPBX 3510 User Manual

1 . 2 L E D I n d i c a
1 . 2 L E D I n d i c
Before you use the Vigor router, please get acquainted with the LED indicators and connectors first.
The displays of LED indicators and connectors for the routers are different slightly. The following
sections will introduce them respectively.
D e s c r i p t i o n
D e s c r i p t i o n
LED
PWR (Power)
ACT (Activity)
WAN
CDR
USB
MSF
VPN
CSM
QoS
LED on Connector
LAN 1/2/3/4
WAN 1
VigorIPPBX 3510 Series User's Guide
t o r s a n d C o n
a t o r s a n d C o n
f o r L E D
f o r L E D
Status
On
Off
Blinking
Off
On
Blinking
On
Off
On
Blinking
Blinking
On
On
On
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
n e c t o r s
n e c t o r s
Explanation
The router is powered on.
The router is powered off.
The router is powered on and running normally.
The router is not ready or failed.
The WAN connection is ready.
It will blink while transmitting data.
CDR utility has been installed and is recording.
CDR utility has not been installed or is unable to
record.
A USB device is connected and active.
The data is transmitting.
Storage (NAND flash or USB disk) is full.
The VPN tunnel is active.
The profiles of CSM (Content Security Management)
for IM/P2P, URL Content Filter, Web Content Filter
application is enabled from Firewall >> General
Setup. (These profiles can be established under CSM
menu).
The QoS function is active.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is connected with 10Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is connected with 10Mbps.
2