Viewing The Current Port Configuration - Alcatel OmniStack 8008 User Manual

Viewing the Current Port Configuration

The Port State screen displays the port type, status, link state, and flow control in
use, as well as the communication speed and duplex mode. To change any of the
port settings, use the Port Configuration menu.
Port Type
-------------------------------------------------------------
1. 1000SX
2. 1000SX
3. 1000SX
4. 1000SX
5. 1000SX
6. 1000SX
7. 1000SX
8. 1000SX
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter
Type
Operational
Link
FlowControl InUse
Speed and DuplexInUse
Alcatel OmniStack 8008
< Port State >
Operational Link
YES UP
YES UP
YES UP
YES UP
YES UP
YES UP
YES UP
YES UP
<OK>
Return to previous panel.
Description
Shows port type as 1000SX (1000BASE-SX).
Shows if the port is functioning or not.
Indicates if the port has a valid connection to an external device.
Shows the flow control type in use. Flow control can eliminate frame loss by
"blocking" traffic from end stations connected directly to the switch. Back
pressure is used for half duplex and IEEE 802.3x for full duplex.
Displays the current port speed and duplex mode used.
FlowControl Speed and
InUse Duplex InUse
NONE 1000-FULL
NONE 1000-FULL
NONE 1000-FULL
NONE 1000-FULL
NONE 1000-FULL
NONE 1000-FULL
NONE 1000-FULL
NONE 1000-FULL
Configuring the Switch
2-23