Alcatel OmniStack 8008 User Manual page 13

Selection
Switch Configuration Menu
Port Configuration
Port State
Spanning Tree
Configuration
Spanning Tree Information
Mirror Port Configuration
Port Trunking
Configuration
IGMP Configuration
BStorm Control
Configuration
Port Security Configuration
Extended Bridge
Configuration
802.1P Configuration
802.1Q VLAN
Base Information
802.1Q VLAN Current
Table Information
802.1Q VLAN Static Table
Configuration
802.1Q VLAN
Port Configuration
Network Monitor Menu
Port Statistics
RMON Statistics
Unicast Address Table
IP Multicast Registration
Table
Description
Enables any port, enables/disables flow control, and sets
communication mode to auto-negotiation, full duplex or half duplex.
Displays operational status, including link state, flow control method, and
duplex mode.
Enables Spanning Tree Algorithm; also sets parameters for hello time,
maximum message age, switch priority, and forward delay; as well as
port priority and path cost.
Displays full listing of parameters for the Spanning Tree Algorithm.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Configures IGMP multicast filtering.
Allows you to enable/disable broadcast storm control on a per-port basis
and set the packet-per-second threshold.
Allows you to enable and configure port security for the switch.
Displays/configures extended bridge capabilities provided by this switch,
including support for traffic classes, GMRP* multicast filtering, and
VLAN extensions.
Configures default port priorities and queue assignments.
Displays basic VLAN information, such as VLAN version number and
maximum VLANs supported.
Displays VLAN groups and port members.
Configures VLAN groups via static assignments, including setting port
members, or restricting ports from being dynamically added to a port by
the GVRP protocol.
Displays/configures port-specific VLAN settings, including PVID, ingress
filtering, and GVRP.
Displays statistics on network traffic passing through the selected port.
Displays detailed statistical information for the selected port such as
packet type and frame size counters.
Provides full address listing, as well as search and clear functions.
Displays all the multicast groups active on this switch, including multicast
IP addresses and corresponding VLAN IDs.
Main Menu
2-3