Vlan Port Configuration - Alcatel OmniStack 8008 User Manual

Web Interface

VLAN Port Configuration

Use this screen to configure port-specific settings for IEEE 802.1Q VLAN features.
Parameter
PVID
Acceptable Frame
Type 1
Ingress Filtering 1
GVRP Status 2
GVRP Failed
Registrations 2
GVRP PDU Origin 2
1. This control does not affect VLAN independent BPDU frames, such as GVRP or STP. However, it does
affect VLAN dependent BPDU frames, such as GMRP.
2. GVRP is not available for the current firmware release.
3-30
Description
The VLAN ID assigned to untagged frames received on this port. Use the
PVID to assign ports to the same untagged VLAN.
This switch accepts "All" frame types, including VLAN tagged or VLAN
untagged frames. Note that all VLAN untagged frames received on this port
are assigned to the PVID for this port.
If set to "True," incoming frames for VLANs which do not include this port in
their member set will be discarded at the inbound port.
Enables or disables GVRP for this port. When disabled, any GVRP packets
received on this port will be discarded and no GVRP registrations will be
propagated from other ports.
Note that, before this port setting takes effect, GVRP must be enabled for the
switch (see Configuring Bridge MIB Extensions on page 3-21).
The total number of failed GVRP registrations, for any reason, on this port.
The Source MAC Address of the last GVRP message received on this port.