Web Interface
VLAN Current Table
This screen shows the current port members of each VLAN and whether or not the
port supports VLAN tagging. Ports assigned to a large VLAN group that crosses
several switches should use VLAN tagging. However, if you just want to create a
small port-based VLAN for one or two switches, you can assign ports to the same
untagged VLAN see "VLAN Port Configuration" on page 3-30. The current
configuration is shown in the following screen.
Parameter
VLAN Entry Delete
Count
VLAN ID
Up Time at Creation
Status
Egress Ports
Untagged Ports
3-26
Description
The number of times a VLAN entry has been deleted from this table.
The ID for the VLAN currently displayed.
The value of sysUpTime (System Up Time) when this VLAN was created.
Shows how this VLAN was added to the switch:
Dynamic GVRP: Automatically learned via GVRP.
Permanent: Added as a static entry.
Shows the ports which have been added to the displayed VLAN group.
Shows the untagged VLAN port members.